Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Reflective Glass Beads to increase reflectivity, durability and slip resistance of surface applied coatings. For ‘drop-on’ or ‘surface-applied’ application which conforms fully to the requirements of Class B of BS 6088 1981.
Ennis-Flint Reflective Glass Beads are for ‘drop-on’ or ‘surface-applied’ application which conforms fully to the requirements of Class B of BS 6088 1981. The Reflective Glass Beads are moisture proofed to facilitate free flow through dispensing equipment. For maximum reflectivity and durability an application rate of 400g/m² to 500g/m² is recommended.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sikafloor Pronto AP 2 is an adhesion promoter for use with Sikafloor 10 Pronto. Sikafloor 10 Pronto is a 4-part, low-viscosity, fast curing primer based on reactiveacrylic resins with enhanced substrate adhesion for the Sikafloor Pronto Modular System.
Rust-Oleum Non-Skid Additive NS 500 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.
Remmers ACC H is a solvent-free, amine accelerator for Remmers Epoxy Flex PH and Remmers Epoxy ST 100. Through the addition of Remmers ACC H the drying times and curing rates of Remmers Epoxy Flex PH and Remmers Epoxy ST 100 can be reduced. Image already added
International Non Slip Aggregate is for use with various International products and helps produce an aggregated non-slip surface where applied. Available in 3 grades: 0.3-0.5mm Quartz (GMA131) 0.5-1.8mm Bauxite (GPA900) 1-3mm Flintag (GMA132).
Remmers QP CAT is an accelerant catalyst in the Remmers QP System providing acceleration of hardening.
Sika PVA Colorflakes are broadcast on to various Sikafloor systems (e.g. Sika ComfortFloor and Sika ComfortFloor Pro) to provide an attractive decorative appearance before being sealed by a compatible clear sealer.
Remmers Colorid Flakes Collection is a coloured flake mixture for mixing into synthetic resin coatings for highlighting or broadcasting. Image already added
Sikafloor Comfort Regupol 4580 is a polyurethane rebound foam shockpad which is part of the Sika ComfortFloor Decorative Pro system. Sikafloor Comfort Regupol 4580 is a prefabricated shockpad produced by bonding polyether-foam crump and fine rubber-dust with a polyurethane compound.
Sikalastic 827 LT is a modified hot-melt adhesive with defined volume increase and chemical bond activated by the hot asphalt used as part of the bridge deck waterproofing system underneath mastic asphalt and asphalt concrete.
Remmers Ceramix 12 is a special, wear resistant, coloured blinding material to be used as blinding material for anti-slip covers and for the production of mortars and screed mixtures. Spread the material full cover into the fresh base coat. After hardening, remove unbound excess of Remmers Ceramix 03. Image already added
Remmers Add 250 is a wear resistant, transparent, chemical resistant polymer granulate. By adding the polymer spheres to liquid sealing materials, transparent as well as coloured, slip resistant sealants can be produced. Image already added
Rust-Oleum Non-Skid Additive NS 300 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.
Remmers Quartz 03/06 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.3 - 0.6mm.
Remmers Floormix Aggregate is a special grade of colour quartz aggregate for the production of epoxy mortar screeds. One primary colour with black and white flecks to achieve an attractive easy to apply decorative resin mortar. Blend with any of Remmers clear epoxy resins as a binder. Ideal for workshops, food production areas, wet areas, police cells,...
Sika PU Coloured Quartz are a blend of graded, coloured quartz aggregate used with various Sika coating systems to provide colour, slip resistance and build. Refer to the respective product data sheets for full details on consumption, use and performance.
Sikafloor Pronto Filler is fine white aggreagate filler of specific grading that should be used as an additive with certain Sikafloor Pronto products to create self-smoothing screeds and levelling mortars.
