When using Accelerex, you are speeding up the curing process of an already catalysed resin.
You would not use Accelerex with an un-catalysed resin because a large amount would be required to be added to each kit.
Vuba recommends to add Accelerex in doses of 4ml. The change will be dependent upon the amount of existing catalyst - see table.
Ambient Temp (℃)
Catalyst Addition / 7.5kg Kit (ml)
Addition of Accelerex per 4ml dose
0-5
14
11%
6 to 7
13
13%
8 to 9
12
14%
10 to 11
11
14%
12 to 13
10
15%
14 to 15
9
16%
16 to 17
8
18%
18 to 19
7
19%
20 to 21
6
21%
22 to 23
5
22%
24 to 25
4
25%
26 to 27
3
33%
28
2
40%
General Guidance:
It is recommended to begin the project with less Accelerex addition than anticipated, and observe the curing profile. In general, contractors should gain experience before use of Accelerex. If not familiar with resin surfacing, we would recommend to simply avoid laying resin bound in low temperatures or when there is a risk of rain or frost before the resin system has had the opportunity to reach its gel time.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Washed and dried bags of aggregate, for use with Vuba kits and binder applications.
1-3mm and 1-4mm aggregates should only be used as part of the mixed blend of aggregates for the Pedestrian and Vehicle grade resin bound kits
2-4, 2-5, 2-6 and 4-6mm aggregates can be used as part of the Pedestrian and Vehicle blend kits but also...
Tools and equipment for application of the Vuba range of resins, binders, and aggregates.
Includes trowels, kneeling pads, grids, spazzle, and application sledge
Note: Extra shipping charges apply at checkout to Vubagrid, Spazzle, and Application Sledge due to size restrictions
More Information Delivery Info
An aliphatic two component polyurethane stone encapsulation binder, for use on driveways, pathways and other landscaping surfaces.
For use with Vuba Aggregates and Binding Quartz
Already included in our Resin Bound Kits:
Vuba Trade (Pedestrian Grade) Resin Bound Kits
Vuba Trade (Vehicle Grade) Resin Bound Kits
More Information...
It is possible to speed up the curing process of Pre- Catalysed Resin using the Vuba Accelerex additive.
A highly catalysed polyurethane resin (Part A)
Diluted in resin to enable the addition of small amounts of catalyst without risk of over catalysing the resin
More Information Delivery Info
