R.S. Oil Tolerant Primer is a two-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. ADVANTAGES Easy application Application onto substrates with engineering oil contamination Excellent adhesion Low odour High solids Image already added
401 WG Epoxy Floor Primer
401 WG Epoxy Floor Primer is a fast curing version of 401 Epoxy Floor Primer designed to be used in lower temperatures or when a fast return to service is required. 401 WG Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its own right.
401 WG Epoxy Floor Primer is a fast curing, two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. 401 WG Epoxy Floor Primer should be used in lower temperatures or when rapid overcoating/access is required.
401 WG Epoxy Floor Primer is non-flammable and solvent free, is low odour, and may be applied to dry or damp surfaces. 401 WG Epoxy Floor Primer has excellent adhesion to most building materials, is nontoxic once cured, and consequently is a highly versatile material lending itself to application in many different types of location and circumstances.
- Excellent adhesion to dry or damp surfaces
- Low odour
- Easily applied
- Taint free
- Very good chemical and abrasion resistance
- Economical and versatile
- Where a fast overcoating/access is required or when application must be carried out in lower temperatures.
- As a clear sealer for concrete and masonry surfaces.
- As a primer for our Floor Coatings e.g. 304 HD Epoxy Floor Coating, 307 Flexible Deck Coat, 303 Epoxy Floor Paint, etc.
- As a damp surface primer or sealer for concrete.
- Suitable for use in food factories, abattoirs, dairies, laboratories, warehouses, subways, chemical bunds etc.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 5m² per KG
- Touch Dry
- 1 Hour
- Brush, Roller, Spray
Be the first to ask a question about this product!
Sikafloor Resiplot is a patented system for treating internal cementitious floors where conventional surface preparation is not viable. The system comprises of a mechanical anchored epoxy/glass-fibre mesh layer which provides a sound base for subsequent layers of synthetic resins or bonded tiled, timber finishes.
Remmers Pore Filler is a high-viscosity 1 component copolymer acrylate dispersion. This thixotropic transparent and non-yellowing synthetic grout is used to seal the pores of quartz or stone carpet floors. The product is easy to install and UV resistant.
Sika Patio Seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of the sunlight, water, oil, petrol and organic growth. The milky solution dries to hard wearing water repellent film which gives a low sheen slip resistant finish which will reduce dirt pickup and facilitate...
Sika Stone Protector is a water based sealer suitable for all forms of natural stone. It can be used internally or externally to resist stains without changing the aesthetic look of the surface. Suitable for use on natural stone including Indian sandstone, granite, slate and limestone. Ideal for use on paths, patios and block paving. Solvent free no VOC’s.
Sikafloor 01 Primer is a very low emission, universal dispersion primer prior to applying leveling compounds. Suitable for pre-treating on walls and floors following the recommended dilution rates. For interior use.
Remmers Epoxy UV 100 is a UV-protected, transparent, epoxy resin with a wide application spectrum. It is used for decorative pebble or Color Quartz covers, for fixating flake coatings and as a glossy, thick layer sealant on decorative substrates. Ideal for workshops, fabrication halls, exhibition or assembly rooms, retail and wholesale areas...
Remmers PUR Aqua Top 500 2K M is a water based, silk matt, transparent, 2-component sealant with very good resistance to UV and chemicals, extremely little tendency to soil and little susceptibility to scratches and is extremely resistant to hot automobile tyres. A silk matt sealant for all Remmers Epoxy and PUR coatings. Image already added
Coo-Var High Performance 2 pack Primer Sealer is an extra heavy duty coating ideal as a barrier or sealer coat if compatibility is a problem when coating an existing paint.
This product is now only available with a minimum order of 800 litres. For an alternative, please contact our sales team on 0113 2455450 or via the contact form. Jotun Jotafloor Sealer is a sealer/primer for all Jotafloor products. Specially designed for use independently as a dust binder for concrete floors. Recommended for warehouses,...
Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....
Sikafloor 316 is a two component, very low VOC, glossy, clear coat, based on polyurea technology to be used on rigid floors to provide a glossy, clear coat to seal Sikafloor epoxy and tough-elastic polyurethane flooring.
Remmers PUR Top Plus is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels, with the inclusion of a slip resistant bead finish. Used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss...
SikaTop 50 is a water based primer used as part of the Sika EmotionFloor range for high absorbent substrates. Excellent adhesion on absorbent substrates, prevents loss of water into the substrate, economic, increases durability, resistant to alkaline pH, ready to use, easy to use, for substrates with higher moisture content. Particularly for use as primer...
A two-pack, specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with Blackfriar Professional High Traffic Floor Paint.