Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid
  • Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid

Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid

3366.5

Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete.

  • Overcoatable after just 3 hours: apply primer and topcoat in one day
  • Easy all-in-1 packaging
  • For new and aged power floated concrete, even with pinholes
  • Light grey colour to increase opacity of the next layers
  • Water-based; low odour

Colour
Size
Finish
£97.28
VAT excluded

£116.74 Tax incl.
Quantity

Description

Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete.

Main Properties

Excellent adhesion and binding power - recoating time of only 3 hours allows application of primer and topcoat in one day - product has a light grey finish, creating a better opacity for the following coating.

Recommended Uses

For use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles. Product can be used in combination with all Rust-Oleum or Mathys epoxy and polyurethane coatings. For any other coating, we recommend a test for suitability.

Technical Data

  • Density: 1,1
  • Gloss Level: Satin
  • Solids content in volume: 50 %
  • Solids Content in weight: 65 %
  • Mixing Ratio: Base : Activator = 3 : 2 (Volume) = 1.1 : 1 (Weight)

Drying Times At 20°C/RH 50%

  • Touch dry: 1,5 hours
  • Dry to handle: 2,5 hours
  • Dry to recoat: 3 hours
  • Fully cured: 5 days
  • Pot Life: 2 hours

Theoretical Consumption

10 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

New concrete should be allowed at least 30 days to dry. Surfaces should be clean, dry and free from oil, grease, dust, dirt, curing compounds and other contaminants. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning. Remove all previous coatings completely.

Remarks

Although the product will improve adhesion on difficult surfaces the characteristics of such surfaces can vary. For this reason a trial area should be applied to ensure that adequate adhesion can be achieved. This also applies to surfaces which are difficult to clean, such as tiles in bare foot areas. Rust-Oleum 3366 is intended as a primer only, not a wearing surface. The product can never assure good adhesion to unsound, friable, unclean or otherwise unsuitable surfaces. Depending on the substrate and how effectively it can be cleaned, Rust-Oleum 3366 may not be as effective as traditional means of preparation such as shot blasting. We would recommend such methods be used whenever possible, especially for larger or more heavily trafficked areas.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
3366.5

Data sheet

Application
Brush, Roller
Dry to Handle (at 20°C)
2 Hours 30 Mins
Dry to Recoat (at 20°C)
3 Hours
Fully Cured (at 20°C)
5 Days
Coverage
10m² per litre
Recommended Thinner/Cleaner
Rust-Oleum Thinner 160.
Density
1,1
Solids by Volume
50 %
VOC
30 g/l
Shelf Life (from date of manufacture)
2 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 10° and 25°C.
Touch Dry
1 Hour 30 Mins
Recommended Dry Film Thickness
50 µm
Recommended Wet Film Thickness
100 µm
UN Number (Activator)
Not regulated
UN Number (Base)
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Thinner 160

Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment. Strong dilution...

Price £13.04
In stock
16 other products in the same category:

Hydron Mona-Guard Nhance

After spending a generous amount of money on the right coloured brick for your driveway, you are now looking for a robust protective coating, whilst enhancing the natural colour of the paving, the Mona-Guard Nhance is the ideal choice. Other Great Uses Enhances the natural colour of the substrate. Resistance to dirt and stains. Highly resistant to...

Price £69.25
In stock

Hydron Nu-Base PU Floor Seal

Nu-Base PU Floor Seal is a specially-formulated floor sealer that protects the concrete or brick surface from absorbing foreign material, such as oil, grease, dirt, water and a wide range of chemicals. Advantages Hard-wearing and chemical resistant Clear finish Perfect for factories, car parks, garages and driveways

Price £73.00
In stock

Hydron Mona-Guard Extra

Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....

Price £69.25
In stock

RSL Resuprime PU

Resuprime PU, a two component, solvent free polyurethane primer designed for use on car parking decks and other areas where a more flexible solution is required, with excellent adhesion to a wide variety of substrates. Its degree of flexibility compliments the properties of the Resudeck ID and Resudeck TD systems. Good flexibility High...

Price £112.00
In stock

404 Epoxy Metal Primer

A water-based epoxy, anti-corrosive primer designed for the protection of steelwork prior to application of our epoxy floor coatings. 

Price £68.89
In stock

Remmers Epoxy UV 100

Remmers Epoxy UV 100 is a UV-protected, transparent, epoxy resin with a wide application spectrum. It is used for decorative pebble or Color Quartz covers, for fixating flake coatings and as a glossy, thick layer sealant on decorative substrates. Ideal for workshops, fabrication halls, exhibition or assembly rooms, retail and wholesale...

Price £63.63
In stock

Sika Stone Protector

Sika Stone Protector is a water based sealer suitable for all forms of natural stone. It can be used internally or externally to resist stains without changing the aesthetic look of the surface.  Suitable for use on natural stone including Indian sandstone, granite, slate and limestone. Ideal for use on paths, patios and block paving....

Price £185.44
In stock

Sikafloor 02 Primer

Sikafloor 02 Primer is a very low emission, ready to use, acrylate based special primer prior to applying levelling compounds for sound, smooth and non-absorbent substrates for interior use. It is suitable as a primer on many tight substrates, old subfloors with water-resistant adhesives residues, old sealed/coated substrates and fully-bonded...

Price £39.54
In stock

RSL Resuprime ST

Resuprime ST (formerly known as Resuprime) is a two-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces.  Features and Benefits: Versatile for many types of application Excellent adhesive properties Easy to apply Can be used as a tack coat for screeds No...

Price £68.19
In stock

SCHÖNOX SDG PLUS

SCHÖNOX SDG PLUS is a rapid-drying, ready-mixed special dispersion-based damp proof membrane suitable for use on unheated cementitious screeds with increased residual moisture up to 4,0 CM-% (96%-RH). Top Features EMICODE EC 1PLUS: very low emission RAL UZ 113: Environment-friendly, because very low-emission Solvent-free according to...

Price £149.85
In stock

Rust-Oleum 5421 Epoxy Floor Primer Rapid

Rust-Oleum 5421 Epoxy Floor Primer Rapid is a fast curing primer for use on new or untreated porous mineral surfaces, like concrete to bind weak and friable substrates - can be overcoated with any Rust-Oleum Mathys epoxy floor paint or polyurethane coating. Overcoatable after just 4 hours: apply primer and topcoat in one day Easy all-in-1...

Price £121.80
In stock

Sikafloor 11 Pronto

Sikafloor 11 Pronto is a two part, medium-viscosity, fast curing primer based on reactive acrylic resins for the Sikafloor Pronto Modular System. Fast curing, medium viscosity primer to achieve a pore free cementitious substrate. Sikafloor 11 Pronto consists of: Part A: Sikafloor 11 Pronto Resin Part B: Sikafloor Pronto Hardener

Price £291.25
In stock

Blackfriar Professional Epoxy Floor Primer

Blackfriar Professional Epoxy Floor Primer is a low-odour, water-based primer that binds and stabilises friable and porous substrates prior to coating with Blackfriar Professional Epoxy Floor Paints. Product Details Water Based formula ensures low odour. Ideal for binding porous concrete surfaces prior to coating with Blackfriar...

Price £80.01
In stock

Remmers PUR Aqua Top 2K M Plus

Remmers PUR Aqua Top 2K M Plus is a water based, textured, silk matt, transparent, 2-component sealant with good resistance to UV-light and chemicals. Class R 11 slip resistance which can be used as a slip resistant, silk matt sealant. Slip-resistant sealant for surfaces subjected to light mechanical loads Silk matt Slip-resistant...

Price £94.95
In stock

RSL Resupen WB

Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...

Price £105.44
In stock

Sikafloor 156

Sikafloor's 156 is a two part epoxy primer, levelling mortar and mortar screed. On its own it is a low viscosity, solvent free epoxy resin, that can be used for priming concrete substrates, cement screeds and epoxy mortars. Combined with Quartz Sands and Sika Extender T is becomes a levelling mortar and mortar screed. Features and Benefits:...

Price £54.65
In stock