R.S Screed Seal is a two-pack epoxy resin surface coating for use with other RSL and Sherwin-Williams products, filling any voids, pockets or interstices exposed in the surface. ADVANTAGES Enhances chemical resistance Prevents water spillage Improves cleanability Hygienic No shrinkage on curing Can be used decoratively Colour stability Image...
Sikafloor ProSeal Pro
Sikafloor ProSeal Pro is a one part low odour clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Suitable for indoor or outdoor application. Click here for other Sikafloor products.
Sikafloor ProSeal Pro is a one part low odour clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Suitable for indoor or outdoor application.
- Sikafloor ProSeal Pro is used for curing and sealing of fresh concrete floors.
- Provides curing and sealing for Sikafloor dry shake hardeners.
- Suitable for exterior and interior application.
Features and Benefits:
- One coat application
- Helps control dusting for both new and existing concrete floor surfaces
- Effectively cures and seals concrete surfaces in a single, economic operation
- Non yellowing
- Easy application by spray or roller
For more details please download the product data sheet from the 'DATASHEETS' tab above.
- Typical Coverage (per coat)
- 5 - 10m² per litre
- Touch Dry
- 8 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Remmers Epoxy ST 100 LV is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Ideal for use in workshops, parking garages, production halls, assembly areas and warehouses...
Sika Block Paving Seal is a low odour clear resin which impregnates and seals block paving, resisting oil and diesel spillage whilst improving the overall appearance of the paving blocks with a matt finish. Ideal for vehicle and pedestrian areas, new and existing drives, forecourts, parking areas, walkways and paths, etc. Simple and quick to apply,...
Remmers Epoxy BS 2000 Transparent is a water emulsifiable, epoxy resin for versatile use, used as an impregnation agent or adhesion promoter in surface protection systems. It can also used as a bonding layer worked wet-on-wet in combination with levelling compounds or epoxy resin systems. Ideal for warehouses, garages, parking garages, balconies.
Nu-Base Hydroseal is the ideal concrete floor sealer to suppress the effect of residual moisture in concrete. For example, if laying down tile flooring on top of concrete, it is first necessary to "seal-in" concrete from moisture, including residual moisture inside the concrete. Ideal for Pubs and clubs Industrial warehouses Dwellings Public...
Sikafloor 220 W Conductive is a two part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use.
Remmers QP Top Plus is a slip-resistant sealant with a very short reaction time used as a sealant in the Remmers QP System. High UV resistance, full curing at temperatures from 0°C, silk gloss surface, can be subjected to mechanical loads, slip-resistant.
A primer exhibiting outstanding adhesion to damp concrete, the fast curing characteristics allow rapid application of subsequent MMA coatings, mortars or screeds from our range.
Sikafloor 03 Primer is a very low emission, ready to use dispersion primer with high penetration for mineral substrates as moisture protection. Intended for application to interior and exterior surfaces prior to the application of levelling compounds. Sikafloor 03 Primer is suitable as a primer on gypsum and cement based substrates, as an intermediate...
Sika Bonding Primer is a rapid curing, water based, two-component primer to consolidate substrates and enhance the adhesion of SikaRoof MTC, Sikalastic, Sikafloor and Sikagard products.
Remmers Epoxy BS 2000 New is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System. Silk matt, low odour, resistant to alternating frost/thaw cycles. Ideal for warehouses, garages and car parks.
Provides a clear, glossy, tack free surface, even in cool, damp conditions. Cures rapidly and is a versatile, chemical resistant sealer/clear coating for concrete and our range of epoxy screeds and mortars.
SCHÖNOX VD universal acrylic primer is for use prior to apply SCHÖNOX underlayments on porous and non porous substrates in interior areas. Suitable for pre-treating on walls and floors following the recommended dillution rates.
R.S. Oil Tolerant Primer is a two-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. ADVANTAGES Easy application Application onto substrates with engineering oil contamination Excellent adhesion Low odour High solids Image already added