Sika Reactivation Primer is a one-component primer for the reactivation of existing Sika Roofing and Balcony systems. Used on Sikalastic 621 TC and Sikafloor 405/415 polyurethane systems. Features and Benefits Allows further coats to be safely applied when the standard re-coating window has been exceeded Single pack Quickly and easily...
Thermilate InsOfloor Primer
Thermilate InsOfloor Primer is a unique thermal insulation acrylic primer that is scientifically proven to work. It's energy-saving formula ensures the primer will reflect valuable heat back up into the room, keeping you warmer for longer without increasing your heating system thermostat.
Thermilate InsOfloor Primer is a unique thermal insulation acrylic primer that is scientifically proven to work. It's energy-saving formula ensures the primer will reflect valuable heat back up into the room, keeping you warmer for longer without increasing your heating system thermostat. Thermilate InsOfloor Primer is used to provide under-floor insulation in homes, offices, shops, hotels, factories, warehouses and is the perfect solution to use under almost any interior walkable surface where space is limited.
It can be easily applied by brush, roller or spray in just 2 coats, Thermilate InsOfloor Primer will enhance the efficiency and reduce running costs when coated on the floor surface beneath electric under-floor-heating systems. Thermilate InsOfloor Primer should be applied to dry floor surfaces such as concrete, screed, wood, tile backer boards, bricks and blocks before laying your floor covering. If used as a tile primer Thermilate InsOfloor Primer bonds with tile adhesive extremely well ensuring a durable floor finish.
Thermilate InsOfloor Primer is supplied in 1 litre bottles and covers up to 6m² per litre with the recommended minimum of two coats for maximum thermal insulation, or up to 12m² per litre with a single coat.
Features & Benefits
- Heat loss reducing insulating primer.
- Can be used as floor primer/tile primer.
- Less energy needed reduces heating bills.
- Lowest cost thermal insulation for floors.
- Water based acrylic primer, therefore eco-friendly.
- Easy to use for all.
- Enhances under floor heating efficiency.
- Can be used under carpets, laminate, all tiles and wooden floors.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 12m² per litre
- Touch Dry
- 2 Hours
|Catherine Simpson on 09/07/2017|| |
Question: Hello. I'd like to apply this product to my concrete floor in an effort to make the kitchen less cold. I'm not installing underfloor heating - just carpet tiles with a thick bitumen backing. The floor is probably about 70 years old. It's a fairly rough surface with some damage where work has been done in the past ( cracks and chips) - so not smooth smooth cement. Is Insofloor suitable for this combination of floor surface and carpet tiles? Any advice appreciated Thank you Catherine
Thermilate InsOfloor Primer can be applied to (dry) concrete before laying your floor covering.
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces: Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp surfaces Also ideal...
402 WG Damp Proof Coating is a fast curing version of 402 Damp Proof Coating designed to be used in lower temperatures or when rapid overcoating/access is required. Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes.
Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting....
Remmers QP Color Top Plus is a slip-resistant, pigmented sealant with a very short reaction time used as a sealant in the Remmers QP System. High UV resistance, full curing at temperatures from 0°C, silk gloss surface, high opacity, can be subjected to mechanical loads, slip-resistant.
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
Remmers Epoxy FAS 100 is a substrate tolerant, unpigmented epoxy resin binder that is used as an impregnation agent, primer, levelling layer and for the production of compression resistant mortars, flow mortars, blinding layers for blinded covers.
Sikafloor 02 Primer is a very low emission, ready to use, acrylate based special primer prior to applying levelling compounds for sound, smooth and non-absorbent substrates for interior use. It is suitable as a primer on many tight substrates, old subfloors with water-resistant adhesives residues, old sealed/coated substrates and fully-bonded...
A primer exhibiting outstanding adhesion to damp concrete, the fast curing characteristics allow rapid application of subsequent MMA coatings, mortars or screeds from our range.
Ennis-Flint CP Primer is a high quality, thin solvent based resin solution for priming concrete surfaces, used to improve adhesion between concrete and surface materials, e.g. hot melt bituminous compounds, thermoplastic or epoxy resin.
Resuprime PU, a two component, solvent free polyurethane primer designed for use on car parking decks and other areas where a more flexible solution is required, with excellent adhesion to a wide variety of substrates. Its degree of flexibility compliments the properties of the Resudeck ID and Resudeck TD systems. Good flexibility High...
Sikafloor 220 W Conductive is a two part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use. Features and Benefits: Highly electrostatically conductive Easy...
Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
Smartkote Protectakote Clear Primer Treatment is a single component primer treatment, which can be used to prepare inorganic surfaces for the subsequent adhesion of Smartkote polyurethane coatings. This product ensures excellent adhesion of reactive, solvent-borne urethanes to unreactive inorganic surfaces without changing their appearance.
Remmers PUR Aqua Top 2K SG is a water based, transparent sealant with a silk gloss for indoor areas suitable for all Remmers Epoxy and PUR coatings. It can also be used for fixating and sealing Remmers flake coatings. Water based, silk gloss, transparent, 2-component sealant with good resistance to UV-light and chemicals. Image already added
Rust-Oleum 5130 Primer DSP is a super-high solids two pack epoxy resin primer designed for the suppression of vapour pressure effects. Creates a barrier to stop rising moisture and vapour pressure Prevents blistering For use on asphalt and concrete Very low solvent content High build system