Ennis-Flint CP Primer

Manufacturer:

Ennis-Flint CP Primer is a high quality, thin solvent based resin solution for priming concrete surfaces, used to improve adhesion between concrete and surface materials, e.g. hot melt bituminous compounds, thermoplastic or epoxy resin.

Bulk Buy

£50.02 tax excl.

£60.02   tax incl.

Product Description

Ennis-Flint CP Primer is a high quality, thin solvent based resin solution for priming concrete surfaces, used to improve adhesion between concrete and surface materials, e.g. hot melt bituminous compounds, thermoplastic or epoxy resin.

Packaging & Coverage

  • Supplied in 25 litre metal drums.
  • Coverage is 0.1 – 0.3 litres/m² depending on the porosity of the substrate.
  • Covers 30 – 100 linear metres per litre at 100mm wide line depending on the porosity of the substrate.

Preparation & Application

  • Can be applied by spray, brush or roller.
  • Ensure the surface is clean and free of dust and laitance.
  • Allow the primer to dry before applying products on top.
  • Can be applied between 0°C and +40°C.

Drying

  • Allow a minimum of 30 minutes to dry before application of material on top.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)3.3 - 10m² per litre
Touch Dry30 mins
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable