Sikafloor CureHard WW is a one part, sodium silicate based clear liquid for curing fresh concrete. This Sikafloor paint is suitable for concrete slabs where no specific curing efficiency or standards are required and can be used for interior or exterior applications.
Rust-Oleum 7201 Universal Floor Primer
Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion of floor paints on mineral substrates.
Features & Benefits
- Easy to apply
- Excellent adhesion on non-porous and dense mineral substrates
- Can be recoated with all Rust-Oleum or Mathys floor paints
- 1 component product
- Prevents, when used on fresh mineral substrates, the saponification of alkyd based top coats.
- Adhesion and impregnation primer for mineral substrates.
New concrete should cure and dry for at least 30 days prior to the application of Rust-Oleum 7201 Universal Floor Primer. Remove oil, grease and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove all laitance, loose or unsound concrete by vacuum-blasting or etching with Rust-Oleum Mathys 108 Surfa Etch Solution. Remove concrete curing compounds completely. Large surfaces should preferably be prepared by abrasive blasting (vacuum blasting) or flame cleaning. Profile maximum 0.5mm. Defects in the concrete should be repaired with Rust-Oleum 5180 Epoxy Repair Mortar or Rust-Oleum Mathys Pegacrete. Small (hair) cracks and air-pockets should be repaired with Rust-Oleum 5412 Epoxy Filler. The surface should be clean and dry during application.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 13m² per litre
- Touch Dry
- 4 Hours
- Brush, Roller
Be the first to ask a question about this product!
R.S. Dampshield FH is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. ADVANTAGES Easy application Use on substrates with hygrometer...
Remmers PUR Aqua Top 2K SG Plus is a silk gloss, water based, textured, transparent sealant with class R 11 slip resistance used as a slip resistant sealant for all Remmers Epoxy and PUR Coatings as well as for fixating and sealing Remmers Flake Coatings. The water based, 2-component sealant has good resistance to UV-light and chemicals....
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
SikaTop 50 is a water based primer used as part of the Sika EmotionFloor range for high absorbent substrates. Excellent adhesion on absorbent substrates, prevents loss of water into the substrate, economic, increases durability, resistant to alkaline pH, ready to use, easy to use, for substrates with higher moisture content. Particularly for use as primer...
401 WG Epoxy Floor Primer is a fast curing version of 401 Epoxy Floor Primer designed to be used in lower temperatures or when a fast return to service is required. 401 WG Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its...
Coo-Var High Performance 2 pack Primer Sealer is an extra heavy duty coating ideal as a barrier or sealer coat if compatibility is a problem when coating an existing paint.
The ideal solution to seal your paved driveway, with resistance to oil, weathering, UV and chemicals, you can have the peace of mind that the Mona-Guard Block Paving Sealer aids in delaying the age of your paving. Other Great Uses Footpaths. Garage forecourts. Town centres. Car parks.
Remmers PUR Top Plus is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels, with the inclusion of a slip resistant bead finish. Used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss...
Remmers PUR Aqua Top 2K M Plus is a water based, textured, silk matt, transparent, 2-component sealant with good resistance to UV-light and chemicals. PUR Aqua Top 2K M Plus is also highly resistant to hot automobile tyres. Class R 11 slip resistance which can be used as a slip resistant, silk matt sealant. Image already added
A two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. Designed to improve the adhesion of coatings and screed systems to substrates that have previously been contaminated with oils, that may still retain some residual contamination.
Remmers PUR Aqua Top 1K is a single component, glossy, clear fixation layer and sealant for indoor areas used for transparent fixation and sealing of flake covers. PUR Aqua Top 1K is a water based, glossy, transparent, non-yellowing, fast drying, single component sealant. Image already added
A two-pack, water-based primer which promotes adhesion on difficult and well worn surfaces prior to applying Blackfriar Professional and other epoxy floor paints.