RSL Resuprime OT (formerly known as R.S. Oil Tolerant Primer) is a two-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. Features and Benefits: Easy application Application onto substrates with engineering oil contamination...
Sikafloor 02 Primer
Sikafloor 02 Primer is a very low emission, ready to use, acrylate based special primer prior to applying levelling compounds for sound, smooth and non-absorbent substrates for interior use. Sikafloor 02 Primer is suitable as a primer on many tight substrates, old subfloors with water-resistant adhesives residues, old sealed/coated substrates and fully-bonded old elastic coverings.
Sikafloor 02 Primer is a very low emission, ready to use, acrylate based special primer prior to applying levelling compounds for sound, smooth and non-absorbent substrates for interior use.
Sikafloor 02 Primer is suitable as a primer on:
- Many tight substrates
- Old subfloors with water-resistant adhesives residues
- Old sealed/coated substrates
- Fully-bonded old elastic coverings
Features & Benefits
- One component
- On walls and floors
- Provides optimum adhesion
- Solvent-free according to TRGS 610
- Good skid resisting properties
- Low consumption / high coverage
- Suitable for application on subfloor heating systems
- Short waiting time
- Low odour
- Easy to apply by roller
- Ready for use
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika Primer MB is a primer and moisture control coating for cementitious substrates prior to levelling or bonding with elastic sikabond adhesives. Sika Primer MB is a one coat, 2-part, solvent free, low viscosity, epoxy resin primer for use in conjunction with Sika Schönox levelling compounds, dispersion primers and SikaBond Wood Floor adhesives.
A primer exhibiting outstanding adhesion for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.
Britannia Epoxy Floor Primer will make light work of your hard porous floor surfaces, allowing for much better adhesion. Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required; this primer will form the perfect base in which to apply the coloured topcoat. Advantages Easy application Eco-friendly...
Remmers PUR Aqua Top 1K is a single component, glossy, clear fixation layer and sealant for indoor areas used for transparent fixation and sealing of flake covers. PUR Aqua Top 1K is a water based, glossy, transparent, non-yellowing, fast drying, single component sealant. Image already added
Nu-Base Hydroseal is the ideal concrete floor sealer to suppress the effect of residual moisture in concrete. For example, if laying down tile flooring on top of concrete, it is first necessary to "seal-in" concrete from moisture, including residual moisture inside the concrete. Ideal for Pubs and clubs Industrial warehouses Dwellings Public...
A single pack, clear floor sealer to help with the prevention of dusting. Ideal where a low cost sealer is required for interior or exterior use on suitably prepared concrete, wood and metal.
Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete.
Resutack PU is a single pack bonding primer coat designed to provide instant strong bonding between bonding and substrate when used with polyurethane coving systems. ADVANTAGES Apply wet on wet with no tack off time Solvent-free Low odour Can apply to many surfaces Excellent adhesion
Coo-Var Floor Sealer is a low cost, clear, semi-gloss sealer for suitably prepared concrete, wood, metal and GRP. ADVANTAGES Low cost External/Internal use Semi-gloss Versatile Prevents dusting
Smartkote EP90 Universal Epoxy Primer, an easy to use two-pack primer for all polyurethane topcoats that provides excellent adhesion to a variety of substrates with the flexibility required for urethane. Pre-weighed components; simply add Part B to Part A and mix Easy to apply with low viscosity once mixed Fast drying – overcoat in 3-4...
SCHÖNOX SHP is a solvent free, 1-component special acrylate dispersion primer for interior applications. SCHÖNOX SHP is a special primer for sound, smooth and non-absorbent substrates. Especially suitable for laying on old vinyl, linoleum and rubber coverings. With short waiting times and easy roller application, this product provides optimum adhesion.
Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
Coo-Var Dampshield is a gas permeable epoxy resin membrane tolerant of residual moisture in concrete floor, enabling earlier covering. ADVANTAGES Enables resin finishes sooner Easy application Can be applied to substrates with hygrometer readings up to 97% RH Solvent free Low odour
R.S. Rapidprime is a two-pack solvent-free epoxy resin primer, designed for brisk overlaying with other resin-based systems. It is ideal for low temperatures and must be applied under 25°C. ADVANTAGES Can be overlaid in 3-4 hours Solvent-free Good adhesion Low odour Easy application Versatile use