Remmers PUR Top is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss levels. A 'Plus' version is available which offers...
SikaBond PVA+ is a general purpose economic adhesive, sealer and mortar improver for concrete, render and plasters. Reduces surface dusting and conforms to BS 5270 for internal plastering. Highly effective and easy to use building adhesive, primer, admixture, bonding agent, sealer and dustproofer. For use on a wide range of building jobs as a general adhesive for wood, cork, paper, textiles etc.
SikaBond PVA+ is a medium viscosity, polyvinyl alcohol stabilized, externally plasticised, vinyl acetate homopolymer. Contains no harmful phthalates.
SikaBond PVA+ is a general purpose economic adhesive, sealer and mortar improver which meets the bond strength requirements of BS5270, "Polyvinyl acetate (PVAC) emulsion bonding agents for internal use with gypsum building plasters".
Features & Benefits
- General purpose bonding agent and admixture for concrete and plasters
- Cement render improver
- Reduces surface dusting
- Conforms to BS 5270 for internal plastering
Areas of Use
- As a highly effective and easy to use building adhesive.
- As a primer, admixture, bonding agent, sealer and dustproofer.
- For use on a wide range of building jobs.
- As general purpose adhesive for wood, cork, paper, textiles etc.
- As an internal filler when mixed with shavings/plaster.
- Not suitable for external applications
- As a wood adhesive, do not use as an externally or for load bearing applications.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
A two-pack, moisture resistant membrane for priming damp concrete floors and screeds prior to coating with Blackfriar Professional Solvent-Free Epoxy Floor Paint.
402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.
Sikafloor Comfort Porefiller is a 2-part, total solids, low VOC, PUR used as part of the Sika ComfortFloor Pro and Sika ComfortFloor Decorative Pro System that is a durable high quality compound used for sealing and levelling of the permeable surface of prefabricated Regupol rubber sheets.
Remmers QP Color Top Plus is a slip-resistant, pigmented sealant with a very short reaction time used as a sealant in the Remmers QP System. High UV resistance, full curing at temperatures from 0°C, silk gloss surface, high opacity, can be subjected to mechanical loads, slip-resistant.
Provides a clear, glossy, tack free surface, even in cool, damp conditions. Cures rapidly and is a versatile, chemical resistant sealer/clear coating for concrete and our range of epoxy screeds and mortars.
Remmers Epoxy ST 100 LV is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Ideal for use in workshops, parking garages, production halls, assembly areas and warehouses...
Sika Patio Seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of the sunlight, water, oil, petrol and organic growth. The milky solution dries to hard wearing water repellent film which gives a low sheen slip resistant finish which will reduce dirt pickup and facilitate...
A two-pack, specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with Blackfriar Professional High Traffic Floor Paint.
R.S. Dampshield FH is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. ADVANTAGES Easy application Use on substrates with hygrometer...
Sikafloor 161 is an economic two-part epoxy primer, levelling mortar and intermediate layer epoxy resin primer for Sikafloor systems and a binder for Sika levelling mortars and screeds. ADVANTAGES Moisture tolerant Low viscosity Good penetration Excellent bond strength Easy application Short waiting times Solvent-free Multi-purpose
Remmers PUR Aqua Top 500 2K M is a water based, silk matt, transparent, 2-component sealant with very good resistance to UV and chemicals, extremely little tendency to soil and little susceptibility to scratches and is extremely resistant to hot automobile tyres. A silk matt sealant for all Remmers Epoxy and PUR coatings. Image already added
Britannia Epoxy Floor Primer will make light work of your hard porous floor surfaces, allowing for much better adhesion. Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required; this primer will form the perfect base in which to apply the coloured topcoat. Advantages Easy application Eco-friendly...
Smartkote EP90 Universal Epoxy Primer, an easy to use two-pack primer for all polyurethane topcoats that provides excellent adhesion to a variety of substrates with the flexibility required for urethane. Pre-weighed components; simply add Part B to Part A and mix Easy to apply with low viscosity once mixed Fast drying – overcoat in 3-4...