Remmers PUR Aqua Top 2K M Plus is a water based, textured, silk matt, transparent, 2-component sealant with good resistance to UV-light and chemicals. PUR Aqua Top 2K M Plus is also highly resistant to hot automobile tyres. Class R 11 slip resistance which can be used as a slip resistant, silk matt sealant. Image already added
SikaBond Waterproof PVA
SikaBond Waterproof PVA is a waterproof vinyl acetate polymer especially formulated for exterior use as an adhesive and sealer. Suitable for brickwork, mortar, render, screed and plaster. Easy to use and unlike normal PVA it will not re-emulsify when wet. Excellent for renders or toughening floors and screeds. Suitable for brickwork, mortar, render, screed and plaster.
SikaBond Waterproof PVA is a waterproof vinyl acetate polymer especially formulated for exterior use as an adhesive and sealer. Suitable for brickwork, mortar, render, screed and plaster. Easy to use and unlike normal PVA it will not re-emulsify when wet.
- Waterproof formula.
- Internal/external use.
- Primer, sealer and cement admixture.
Areas For Use
- Excellent for renders or toughening floors and screeds.
- Waterproof PVA adhesive and admixture which primes, seals, waterproofs and toughens.
- Suitable for brickwork, mortar, render, screed and plaster.
- Do not apply below 10°C
- Do not apply to surfaces if rain is imminent where wash off may occur.
- It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
SikaTop 50 is a water based primer used as part of the Sika EmotionFloor range for high absorbent substrates. Excellent adhesion on absorbent substrates, prevents loss of water into the substrate, economic, increases durability, resistant to alkaline pH, ready to use, easy to use, for substrates with higher moisture content. Particularly for use as primer...
SCHÖNOX SHP is a solvent free, 1-component special acrylate dispersion primer for interior applications. SCHÖNOX SHP is a special primer for sound, smooth and non-absorbent substrates. Especially suitable for laying on old vinyl, linoleum and rubber coverings. With short waiting times and easy roller application, this product provides optimum adhesion.
Britannia Epoxy Floor Primer will make light work of your hard porous floor surfaces, allowing for much better adhesion. Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required; this primer will form the perfect base in which to apply the coloured topcoat. Advantages Easy application Eco-friendly...
Resujoint V is a flexible, thixotropic, two-component epoxy joint sealant designed to accommodate low level movement in vertical and horizontal joints. ADVANTAGES Tough, yet flexible Adhesive Easy to clean Good chemical resistance Accommodates movement Maintains a seamless finish
Sika Patio Seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of the sunlight, water, oil, petrol and organic growth. The milky solution dries to hard wearing water repellent film which gives a low sheen slip resistant finish which will reduce dirt pickup and facilitate...
Sikafloor 01 Primer is a very low emission, universal dispersion primer prior to applying leveling compounds. Suitable for pre-treating on walls and floors following the recommended dilution rates. For interior use.
Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....
A two-pack, specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with Blackfriar Professional High Traffic Floor Paint.
A rapid curing primer for use on new or untreated porous mineral surfaces, like concrete to bind weak and friable substrates - can be overcoated with any Rust-Oleum Mathys epoxy floor paint or polyurethane coating.
Remmers QP Top Plus is a slip-resistant sealant with a very short reaction time used as a sealant in the Remmers QP System. High UV resistance, full curing at temperatures from 0°C, silk gloss surface, can be subjected to mechanical loads, slip-resistant.
MP Primer is an economic two-pack, high solids epoxy resin primer designed to scratch coat surfaces before applying resin screeds or toppings. ADVANTAGES Excellent adhesion Versatile for varied application High solids Low odour Image already added
Sikafloor 327 is a 2-part, tough, elastic polyurethane self-smoothing resin coating for indoor use in Decorative and Industrial flooring. Sikafloor 327 is solvent free, very low VOC emission and part of the Sika Comfort Floor Tough system.
401 Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its own right. Used to maximise the performance, adhesion and spreading rates of our systems it can even be applied to damp concrete.