Remmers Epoxy BS 2000 New is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System. Silk matt, low odour, resistant to alternating frost/thaw cycles. Ideal for warehouses, garages and car parks.
SikaBond Contractors PVA
SikaBond Contractors PVA is a multi-purpose bonding agent, primer sealer, cement filler and plaster admixture that adheres to most common building and D.I.Y. materials except PVC and rubber.
Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous.
Features and Benefits
- Improves adhesion to most common building surfaces
- Improves flexibility of mortars and screeds
SikaBond Contractors PVA is a multi-purpose bonding agent, primer sealer, cement filler and plaster admixture that adheres to most common building and D.I.Y. materials except PVC and rubber. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture.
NOTE: For areas subject to constant damp, use SikaBond SBR+ which is water resistant.
- Improves adhesion to most common building surfaces.
- Improves flexibility of mortars and screeds.
Areas For Use
- As a general purpose adhesive for wood, cork, paper, textiles etc.
- As an admixture for mortar/screeds/renders.
- As a bonding agent for screeds/renders to difficult substrates.
- As a primer/sealer in tiling applications.
- As an internal filler when mixed with wood shavings, plaster etc.
- Do not use in exterior applications or in areas subject to constant damp. In these areas use SikaBond SBR+.
- As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use. If in doubt, please contact Technical Services department for advice or refer to Technical Data Sheets.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Rust-Oleum 5220 Epoxyshield® Sealer is a one-component, water-based, concrete sealer based on a vinyl acrylic binder: Reduces dust production on concrete Protects against liquid and chemical spills Suitable for garage floors Cost-effective Quick drying and easy to apply
Sikafloor CureHard 24 is a transparent surface hardener, dustproofer, sealing and curing compound for concrete. From the Sikafloor range, this is suitable for interior or exterior applications. Features and Benefits: Ready to use Easy to apply Improved chemical and abrasion resistance compared to untreated concrete Reduced dusting of...
A two-pack, specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with Blackfriar Professional High Traffic Floor Paint.
401 WG Epoxy Floor Primer is a fast curing version of 401 Epoxy Floor Primer designed to be used in lower temperatures or when a fast return to service is required. 401 WG Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its...
SCHÖNOX VD universal acrylic primer is for use prior to apply SCHÖNOX underlayments on porous and non porous substrates in interior areas. Suitable for pre-treating on walls and floors following the recommended dillution rates.
SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates. Used for priming, consolidating and sealing of absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues. Features & Benefits 1-part, ready to use. Rapid drying...
Remmers Epoxy UV 100 TX (formerly Acolan Sediment Resin) is a thixotropic, transparent epoxy resin with little tendency to yellow used as a binder for flake and blinded coatings or as a pore filler on open-pored, epoxy resin screeds. Can be subjected to mechanical and chemical loads. Image already added
Nu-Base Hydroseal is the ideal concrete floor sealer to suppress the effect of residual moisture in concrete. For example, if laying down tile flooring on top of concrete, it is first necessary to "seal-in" concrete from moisture, including residual moisture inside the concrete. Ideal for Pubs and clubs Industrial warehouses Dwellings Public...
402 WG Damp Proof Coating is a fast curing version of 402 Damp Proof Coating designed to be used in lower temperatures or when rapid overcoating/access is required. Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes.
Sika Dustproofer is a ready to use dustproofer and concrete surface hardener for concrete floors, paths, driveways etc. It forms hard insoluble crystals binding together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving. Features and Benefits Hardens and dustproofs concrete surfaces Improves...
Remmers PUR UV 100 is a pure unfilled and unpigmented polyurethane resin binder that is used as a fully stable binder for quartz, stones, pebbles and other aggregates, particularly when used outside or where complete UV stability and a degree of flexibility is required. A highly flexible grade (80% elongation) is available upon request (note:...
Remmers Concrete and Screed Strengthener is a chemical consolidation agent for the protection for fresh concrete, strengthening and repairs, surface protection and adhesive primer.
Resuprime ZP, is a two-pack, high solids epoxy resin zinc phosphate primer coat principally designed to bond thin section resin based screeds and toppings to steel and ferrous structures, and is recommended for use as an anti-corrosion primer for Sherwin-Williams flooring products and on mezzanine areas, bridge decks, loading bays, ramps and...
Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
Sikafloor 10 Pronto is a 4-part, low-viscosity, fast curing primer based on reactive acrylic resins with enhanced substrate adhesion for the Sikafloor Pronto Modular System. Sikafloor 10 Pronto consists of: Part A: Sikafloor 10 Pronto Resin Part B: Sikafloor Pronto Hardener Part C: Sikafloor Pronto AP 1 Part D: Sikafloor Pronto AP 2