SCHÖNOX VD

Manufacturer:

SCHÖNOX VD universal acrylic primer is for use prior to apply SCHÖNOX underlayments on porous and non porous substrates in interior areas. Suitable for pre-treating on walls and floors following the recommended dillution rates.

Bulk Buy

£66.97 tax excl.

£80.36   tax incl.

Product Description

SCHÖNOX VD universal acrylic primer is for use prior to apply SCHÖNOX underlayments on porous and non porous substrates in interior areas. Suitable for pre-treating on walls and floors following the recommended dillution rates.

Product characteristics

  • EMICODE EC 1PLUS: very low emission
  • for interior use on walls and floors
  • solvent-free according to TRGS 610
  • low consumption / high coverage
  • suitable for application on subfloor heating systems
  • short waiting time
  • can be applied to almost all substrates
  • can be sprayed
  • easy to apply
  • can be diluted with water
  • ready for use
  • grip promoting
  • binds residual dust

Applications

SCHÖNOX VD is suitable:

  • as a primer for reducing absorbency
  • as a primer to improve adhesion on smooth and sound substrates
  • as a primer to protect against moisture from levelling compounds

Substrates

SCHÖNOX VD is suitable on:

  • concrete
  • cement and rapid cement screeds
  • calcium sulphate based screeds
  • gypsum plaster (according to EN 13279-1)
  • cement plaster, lime-cement plaster (CS I - CS IV according to EN 998-1)
  • old substrates with old water-resistant adhesive residues
  • gypsum board
  • dry screeds
  • wooden substrates
  • mastic asphalt screeds (completely sanded) IC 10 and IC 15 according to EN 13 813

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)50 - 80g/m²
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable