Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
SCHÖNOX SHP is a solvent free, 1-component special acrylate dispersion primer for interior applications. SCHÖNOX SHP is a special primer for sound, smooth and non-absorbent substrates. Especially suitable for laying on old vinyl, linoleum and rubber coverings. With short waiting times and easy roller application, this product provides optimum adhesion.
SCHÖNOX SHP is a solvent free, 1-component special acrylate dispersion primer for interior applications. SCHÖNOX SHP is a special primer for sound, smooth and non-absorbent substrates. Especially suitable for laying on old vinyl, linoleum and rubber coverings. With short waiting times and easy roller application, this product provides optimum adhesion. It has low consumption/high coverage rates, and can be used on both floors and walls. It has low emissions, and is also odourless, making it pleasant to use.
- As a primer to improve adhesion on smooth and sound substrates
- As a primer over Sika Primer MB
SCHÖNOX SHP is suitable on:
- old substrates such as ceramic tiles, natural stones and terrazzo
- insufficient sanded mastic asphalt screeds or rolled asphalt concrete
- old sealed/coated surfaces
- old smooth and tight concrete substrates
- magnesia screeds
- old substrates with old water-resistant adhesive residues
- steel and other metals
- fully bonded, thoroughly cleaned and sanded resilient floorings (except PO-coverings)
Limited suitability on absorbent substrates (skin forming may occur).
This product has different uses and performance depending on whether used in flooring applications or tiling applications. Please see the separate Product Data Sheets listed below.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 100 - 150 g/m²
- Touch Dry
- 1 - 4 Hours
Be the first to ask a question about this product!
R.S Screed Seal is a two-pack epoxy resin surface coating for use with other RSL and Sherwin-Williams products, filling any voids, pockets or interstices exposed in the surface. ADVANTAGES Enhances chemical resistance Prevents water spillage Improves cleanability Hygienic No shrinkage on curing Can be used decoratively Colour stability Image...
Remmers Pore Filler is a high-viscosity 1 component copolymer acrylate dispersion. This thixotropic transparent and non-yellowing synthetic grout is used to seal the pores of quartz or stone carpet floors. The product is easy to install and UV resistant.
A primer exhibiting outstanding adhesion for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.
Sika Dustproofer is a ready to use dustproofer and concrete surface hardener for concrete floors, paths, driveways etc. Sika Dustproofer forms hard insoluble crystals binding together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving. Improves wear resistance, for garage, industrial and workshop floors.
Sikafloor ProSeal 90 is a curing and sealing compound for concrete floors. It is a one component Sikafloor product that has higher efficiency curing, sealing and hardening liquid and is suitable for exterior and interior application.
A two-pack, moisture resistant membrane for priming damp concrete floors and screeds prior to coating with Blackfriar Professional Solvent-Free Epoxy Floor Paint.
Bradite Floor Primer is a clear coating solution to prime power floated, non-porous concrete and quarry tiles ready for top coating. Excellent for food areas due to it's low-odour and non-taint solution. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Primer and topcoat can be applied the same day...
Resujoint V is a flexible, thixotropic, two-component epoxy joint sealant designed to accommodate low level movement in vertical and horizontal joints. ADVANTAGES Tough, yet flexible Adhesive Easy to clean Good chemical resistance Accommodates movement Maintains a seamless finish
Remmers QP 100 is a very fast reacting, transparent binder used as a base coat for blind coatings, transparent fixing layer for flake coatings and a transparent top sealant. High UV resistance, full curing at temperatures from 0°C, can be subjected to mechanical and chemical loads.
Sikafloor 220 W Conductive is a two part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use.
Smartkote EP90 Universal Epoxy Primer, an easy to use two-pack primer for all polyurethane topcoats that provides excellent adhesion to a variety of substrates with the flexibility required for urethane. Pre-weighed components; simply add Part B to Part A and mix Easy to apply with low viscosity once mixed Fast drying – overcoat in 3-4...
Sikafloor CureHard 24 is a transparent surface hardener, dustproofer, sealing and curing compound for concrete. From the Sikafloor range, this is suitable for interior or exterior applications.
Sikafloor ProSeal W (from the full range) is a one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. A one part water dispersed acrylic emulsion to cure, harden and seal fresh or hardened concrete, and can be used in exterior and interior application.