Mona-Guard Block Paving Sealer
  • Mona-Guard Block Paving Sealer
  • Mona-Guard Block Paving Sealer
  • Mona-Guard Block Paving Sealer

Hydron Mona-Guard Block Paving Sealer

MGB

The ideal solution to seal your paved driveway, with resistance to oil, weathering, UV and chemicals, you can have the peace of mind that the Mona-Guard Block Paving Sealer aids in delaying the age of your paving.

Other Great Uses

  • Footpaths.
  • Garage forecourts.
  • Town centres.
  • Car parks.
Colour
Size
£31.41
VAT excluded

£37.69 Tax incl.
Quantity

Description

This sealer is a brilliant solution for those looking to prolong the life of their paving. With resistance to abrasions, you will have the peace of mind that your paving will withstand everyday use. The Mona-Guard Block Paving Sealer is also an ideal solution for paved driveways, as the sealer resists the penetration of oil and chemicals into the paving.


Product Use in the Workplace

  • Car park - Subjected to numerous vehicles of various sizes, dripping oil and grease on parking spaces, resulting in a dirt and oil-ridden surface.
  • Footpath - These high footfall areas are exposed to footwear of all types from all environments mean the footpath is subjected to many contaminants that alter the appearance of the path and increase the potential for injury.
  • Paved driveway - Oil and chemicals spilled on paved driveways is not only a safety hazard, but the aesthetic of the paving bricks is greatly altered, making the environment looking more like a mechanics garage rather than a lovely family home.

Features & Benefits

  • Resistant to weathering, UV and chemicals, including oil.
  • Delays ageing of your paving.
  • Inhibits weed growth.
  • 12-month shelf life.

Note: This sealer will be milky white in colour, but once dried will be clear/transparent.

Preparation

Ensure surfaces to be treated are clean, free from contamination and dry. Treat all areas affected by organic growth with Mona-Clean Algae Remover.

Application

Shake container well before use. Apply by brush, roller or spray. The surface to be treated should be impregnated up to saturation point. One application required. Do not over apply. Remove any excess from the surface after 20 minutes. Do not apply at temperatures below 5°C. All equipment should be cleaned with water immediately after use.

Recommended storage is in a cool, dry place with temperatures between 10-15°C. Do not allow to freeze.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
MGB

Data sheet

Application
Brush, Roller, Spray
Coverage
3-8m²/Litre, dependant upon the porosity of the substrate.
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Ennis-Flint MMAXGRIP PRMX Primer

Ennis-Flint MMAXGRIP PRMX Primer is a 2-component, fast-reactive/fast-curing MMA-based (polymethyl methacrylate) resin primer used as a barrier on absorbent substrates in preparation for the later application of Ennis-Flint waterproofing or surfacing products. Easy to apply, very good adhesion on absorbent substrates, hydrolysis and alkali-resistant,...

Price £191.42
In stock

Hydron Mona-Guard Dustproofer

Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting. Reduces oil...

Price £32.73
In stock

RSL R.S. Dampshield

R.S. Dampshield is a two-component epoxy resin primer. which enables floor coverings such as carpets, tiles, wood and vinyl to be applied sooner. It allows concrete to dry faster, combating the residual moisture in your concrete floor. ADVANTAGES Easy application Solvent-free Low odour Excellent adhesion Image already added

Price £66.94
In stock

Remmers PUR UV 100

Remmers PUR UV 100 is a pure unfilled and unpigmented polyurethane resin binder that is used as a fully stable binder for quartz, stones, pebbles and other aggregates, particularly when used outside or where complete UV stability and a degree of flexibility is required. A highly flexible grade (80% elongation) is available upon request (note:...

Price £135.00
In stock

314 Clear Floor Sealer

A single pack, clear floor sealer to help with the prevention of dusting. Ideal where a low cost sealer is required for interior or exterior use on suitably prepared concrete, wood and metal.

Price £47.72
In stock

Sikafloor Comfort Adhesive

Sikafloor Comfort Adhesive is a 2-part, total solid, low VOC PUR adhesive that is part of the Sika ComfortFloor Pro and Sika ComfortFloor Decorative Pro System used to adhere Sikafloor Comfort Regupol 6015H and Sikafloor Comfort Regupol 4580 to concrete and cementitious screeds.

Price £163.94
In stock

Remmers Epoxy BS 2000 Transparent New

Remmers Epoxy BS 2000 Transparent is a water emulsifiable, epoxy resin for versatile use, used as an impregnation agent or adhesion promoter in surface protection systems. It can also used as a bonding layer worked wet-on-wet in combination with levelling compounds or epoxy resin systems. Ideal for warehouses, garages, parking garages, balconies.

Price £48.51
In stock

Sikafloor 161

Sikafloor 161 is an economic two-part epoxy primer, levelling mortar and intermediate layer epoxy resin primer for Sikafloor systems and a binder for Sika levelling mortars and screeds. ADVANTAGES Moisture tolerant Low viscosity Good penetration Excellent bond strength Easy application Short waiting times Solvent-free Multi-purpose

Price £119.26
In stock

Sikafloor ProSeal

Sikafloor ProSeal is a one component high performance curing, sealing and hardening compound for concrete floors from the Sikafloor product range - the original and the best!

Price £241.43
In stock

Hydron Nu-Base Epoxy Floor Primer

Nu-Base Epoxy Floor Primer has been specifically-formulated to cure in damp conditions, making it an ideal choice to prime structures such as subways and multi-storey car parks, where moisture can linger. Upon proper application, this primer will act as a damp-proof membrane on the floor. Advantages Cures in damp conditions 3-5m²/KG coverage "Straw"...

Price £80.25
In stock

404 Epoxy Metal Primer

A water-based epoxy, anti-corrosive primer designed for the protection of steelwork prior to application of our epoxy floor coatings. 

Price £68.89
In stock

Remmers PUR Aqua Top 2K SG

Remmers PUR Aqua Top 2K SG is a water based, transparent sealant with a silk gloss for indoor areas suitable for all Remmers Epoxy and PUR coatings. It can also be used for fixating and sealing Remmers flake coatings. Water based, silk gloss, transparent, 2-component sealant with good resistance to UV-light and chemicals. Image already added

Price £307.28
In stock

Remmers PUR Aqua Top M

Remmers PUR Aqua Top M is used as a matt finish coating on synthetic resin coating systems. This coating is especially suitable as a finish coat in schools, hospitals, car parks and various decorative applications. Flexible, UV resistant, low dirt adhesion, easy to clean, outstanding wear resistance.

Price £277.02
In stock

Remmers Pore Filler

Remmers Pore Filler is a high-viscosity 1 component copolymer acrylate dispersion. This thixotropic transparent and non-yellowing synthetic grout is used to seal the pores of quartz or stone carpet floors. The product is easy to install and UV resistant.

Price £145.98
In stock