Mona-Guard Nhance
  • Mona-Guard Nhance

Hydron Mona-Guard Nhance

MGEN

After spending a generous amount of money on the right coloured brick for your driveway, you are now looking for a robust protective coating, whilst enhancing the natural colour of the paving, the Mona-Guard Nhance is the ideal choice.

Other Great Uses

  • Enhances the natural colour of the substrate.
  • Resistance to dirt and stains.
  • Highly resistant to weathering and UV.
  • Conforms to EN 1504-2.
Colour
Size
£69.25
VAT excluded

£83.10 Tax incl.
Quantity

Description

Nhance is the name, enhance is the name of the game. The Mona-Guard Nhance is specially-formulated to enhance the colour of the substrate. Be it coloured brickwork, concrete, stone, marble (to name a few), applying this clear coating lifts the natural colour; the end result being an even greater aesthetic to your construction.


Product Use in the Workplace

  • Homes - Modern homes are not just homely on the inside, they are also homely on the outside. Nobody wants their pride of joy spoiled by stained or dull brickwork.
  • Public building - Spending public money on buildings means that the finished article has to represent the place and people. It can never be dirty or dull-looking, but without proper maintenance, this outcome is all too possible. On-going protection from the elements, dirt and stains means more public funds can be freely-available for other projects.

Features & Benefits

  • Enhances the natural colour of the substrate.
  • Highly resistant to weathering and UV.
  • Resistance to dirt and stains.
  • Non-stick finish.
  • Conforms to EN 1504-2.
  • 12-month shelf life.

Preparation

Ensure surfaces to be treated are clean, free from contamination and dry. Treat all areas affected by organic growth with Mona-Clean Algae Remover.

Application

Shake container well before use. Apply by brush, roller or spray. The surface to be treated should be Impregnated up to saturation point. One application required. Do not over apply. Remove any excess from the surface after 20 minutes. Do not apply at temperatures below 5°C. All equipment should be cleaned with water after use.

Recommended storage is in a cool, dry place with temperatures between 10-15°C. Do not allow to freeze.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
MGEN

Data sheet

Application
Brush, Roller, Spray
Coverage
6-16m²/Litre, dependent upon the porosity of the substrate.
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

RSL Resugrip

Resugrip is a high-build, pigment and solvent-free polyurethane floor binder for when anti-slip is essential. It is designed to be added to surface dressing with aggregates and is very hard-wearing. ADVANTAGES Good chemical resistance High bond strength Will cure at temperatures down to 5°C Coloured aggregates are available to make it decorative...

Price £120.29
In stock

Remmers Epoxy Quick 100

Remmers Epoxy Quick 100 is a very fast reacting, transparent epoxy resin that is used as a primer, for levelling layers and for the production of compression resistant mortars beneath coatings. Can be subjected to heavy mechanical and chemical loads. Ideal for consumer markets, workshops, fabrications halls, assembly areas, food industry,...

Price £66.60
In stock

Remmers PUR Top Plus

Remmers PUR Top Plus is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels, with the inclusion of a slip resistant bead finish. Used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss...

Price £140.85
In stock

Sikafloor CureHard 24

Sikafloor CureHard 24 is a transparent surface hardener, dustproofer, sealing and curing compound for concrete. From the Sikafloor range, this is suitable for interior or exterior applications.

Price £89.10
In stock

Remmers Epoxy FAS 100

Remmers Epoxy FAS 100 is a substrate tolerant, unpigmented epoxy resin binder that is used as an impregnation agent, primer, levelling layer and for the production of compression resistant mortars, flow mortars, blinding layers for blinded covers.

Price £65.16
In stock

Sikafloor 156

Sikafloor's 156 is a two part epoxy primer, levelling mortar and mortar screed. On its own it is a low viscosity, solvent free epoxy resin, that can be used for priming concrete substrates, cement screeds and epoxy mortars. Combined with Quartz Sands and Sika Extender T is becomes a levelling mortar and mortar screed.

Price £54.65
In stock

Remmers Pore Filler

Remmers Pore Filler is a high-viscosity 1 component copolymer acrylate dispersion. This thixotropic transparent and non-yellowing synthetic grout is used to seal the pores of quartz or stone carpet floors. The product is easy to install and UV resistant.

Price £145.98
In stock

Remmers Epoxy UV 100

Remmers Epoxy UV 100 is a UV-protected, transparent, epoxy resin with a wide application spectrum. It is used for decorative pebble or Color Quartz covers, for fixating flake coatings and as a glossy, thick layer sealant on decorative substrates. Ideal for workshops, fabrication halls, exhibition or assembly rooms, retail and wholesale areas...

Price £63.63
In stock

401 Epoxy Floor Primer

401 Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its own right. Used to maximise the performance, adhesion and spreading rates of our systems it can even be applied to damp concrete.

Price £59.54
In stock

RSL R.S. Oil Tolerant Primer

R.S. Oil Tolerant Primer is a two-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. ADVANTAGES Easy application Application onto substrates with engineering oil contamination Excellent adhesion Low odour High solids Image already added

Price £73.32
In stock

Hydron Nu-Base PU Floor Seal

Nu-Base PU Floor Seal is a specially-formulated floor sealer that protects the concrete or brick surface from absorbing foreign material, such as oil, grease, dirt, water and a wide range of chemicals. Advantages Hard-wearing and chemical resistant Clear finish Perfect for factories, car parks, garages and driveways

Price £73.00
In stock

Jotun Jotafloor Solvent Free Primer

This product is now only available with a minimum order of 800 litres. For an alternative, please contact our sales team on 0113 2455450 or via the contact form. Jotun Jotafloor Solvent Free Primer is a transparent two component, polyamine cured, and solvent free epoxy coating. It ensures very good adhesion on most concrete floors in...

Price £56.44
In stock

SCHÖNOX SDG

SCHÖNOX SDG is a very low emission special dispersion primer ready for use, suitable for the fast pre-treatment of unheated cementitious screeds with increased residual moisture up to 4.0 CM-% (85%-rh).

Price £158.13
In stock

Remmers QP 100

Remmers QP 100 is a very fast reacting, transparent binder used as a base coat for blind coatings, transparent fixing layer for flake coatings and a transparent top sealant. High UV resistance, full curing at temperatures from 0°C, can be subjected to mechanical and chemical loads.

Price £64.94
In stock

Remmers PUR Top

Remmers PUR Top is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss levels. A 'Plus' version is available which offers...

Price £140.85
In stock