A two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. Designed to improve the adhesion of coatings and screed systems to substrates that have previously been contaminated with oils, that may still retain some residual contamination.
Britannia Concrete Floor Sealer
Concrete surfaces naturally dust and powder. In some cases this is not a problem, but there are many environments where this dusting would pose a significant problem, such as in commercial kitchens and laboratories.
Advantages of Dust-proofing
- Reduction of contamination
- Health & Safety
Food processing areas are one such environment that must reduce contamination. Nobody wants concrete power in their sandwich. This happens because concrete naturally dusts, and can create problems for many environments. Britannia Concrete Floor Sealer locks-in the concrete floor, eliminating dusting. Consider the following venues which may have concrete floors, and why you'd want to seal it, so that no concrete dust and powder can spread:
- PCB manufacturing plants
- Non-industrial factories.
- Professional kitchens.
- Food processing plants/areas.
Product Use in the Workplace
- Workshops - A hard-wearing and protective floor is one of the requirements of workshops of all types.
- Food manufacturing plant - Be it a sandwich production line, meat processing plant or a frozen food manufacturer, the production of food stuffs must be done in such a way that external contaminants are prevented rather than extinguished. Prevention is better than cure as they say. Protecting floors from contamination from fungus and bacteria is definitely a must for all food preparation environments.
Features & Benefits
- Seals in concrete dust, and produces a subtle sheen.
- Easy to apply.
- Low odour.
- Up to 18-months shelf life.
Floor areas must be clean, dry and free of all contamination. The floor must be allowed to dry and cleaned and any dust or debris swept or vacuumed off. Wall surfaces to be sealed should be brushed dry to remove dust and loose material.
Stir well before use and do not thin. Britannia Concrete Floor Sealer may be applied using a soft brush or broom, a nylon pile roller or squeegee. A thin, even, puddle-free first coat should be applied, and this must be allowed to DRY THOROUGHLY (at least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Soft brush or broom, nylon pile roller or squeegee
- Touch Dry
- At least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat.
|peter keen on 07/05/2019|| |
Is this product for external use on a crossing which some of the aggregate has become exposed? The concrete was laid 3 years ago and the crossing is 24 m2.
Britannia Concrete Floor Sealer is not suitable for exterior use as a finish, our 314 Clear Floor Sealer can be used externally but we would require more information on what the 'crossing' is and what type of traffic it recieves to be able to confirm suitability. Please contact our Technical Team on 0113 2455450 (option 2) or [email protected] with more information.
Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting....
Sikafloor Resiplot is a patented system for treating internal cementitious floors where conventional surface preparation is not viable. The system comprises of a mechanical anchored epoxy/glass-fibre mesh layer which provides a sound base for subsequent layers of synthetic resins or bonded tiled, timber finishes.
Remmers Epoxy MT 100 is a special primer for matt damp substrates based on a transparent epoxy resin. Remmers Epoxy MT 100 is an un-pigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compres-sion resistant mortars, flow mortars as well as a blinded layer for blinded covers.
This product is now only available with a minimum order of 800 litres. For an alternative, please contact our sales team on 0113 2455450 or via the contact form. Jotun Jotafloor Sealer is a sealer/primer for all Jotafloor products. Specially designed for use independently as a dust binder for concrete floors. Recommended for warehouses,...
Sikafloor ProSeal W (from the full range) is a one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. A one part water dispersed acrylic emulsion to cure, harden and seal fresh or hardened concrete, and can be used in exterior and interior application.
Remmers PUR UV 100 is a pure unfilled and unpigmented polyurethane resin binder that is used as a fully stable binder for quartz, stones, pebbles and other aggregates, particularly when used outside or where complete UV stability and a degree of flexibility is required. A highly flexible grade (80% elongation) is available upon request (note:...
Thermilate InsOfloor Primer is a unique thermal insulation acrylic primer that is scientifically proven to work. It's energy-saving formula ensures the primer will reflect valuable heat back up into the room, keeping you warmer for longer without increasing your heating system thermostat.
Bradite Floor Primer is a clear coating solution to prime power floated, non-porous concrete and quarry tiles ready for top coating. Excellent for food areas due to it's low-odour and non-taint solution. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Primer and topcoat can be applied the same day...
Coo-Var Floor Sealer is a low cost, clear, semi-gloss sealer for suitably prepared concrete, wood, metal and GRP. ADVANTAGES Low cost External/Internal use Semi-gloss Versatile Prevents dusting
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces: Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp surfaces Also ideal...
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
Sika Stone Protector is a water based sealer suitable for all forms of natural stone. It can be used internally or externally to resist stains without changing the aesthetic look of the surface. Suitable for use on natural stone including Indian sandstone, granite, slate and limestone. Ideal for use on paths, patios and block paving. Solvent free no VOC’s.
Remmers Epoxy UV 100 is a UV-protected, transparent, epoxy resin with a wide application spectrum. It is used for decorative pebble or Color Quartz covers, for fixating flake coatings and as a glossy, thick layer sealant on decorative substrates. Ideal for workshops, fabrication halls, exhibition or assembly rooms, retail and wholesale areas...