Remmers PUR Top Plus is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels, with the inclusion of a slip resistant bead finish. Used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss...
Britannia Epoxy Floor Primer
Britannia Epoxy Floor Primer will make light work of your hard porous floor surfaces, allowing for much better adhesion. Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required; this primer will form the perfect base in which to apply the coloured topcoat.
- Easy application
Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required, this primer will form the perfect base in which to apply the coloured topcoat. Britannia Epoxy Floor Primer will make light work of hard porous floor surfaces, allowing for much better adhesion.
Ideal for environments that need a dust-free hard-wearing surface to withstand high footfall, such as:
- Car showrooms.
- Factories, including the use of forklift trucks.
- R&D workshops.
- Educational establishments.
Product Use in the Workplace
- Workshops - A hard-wearing and protective floor is one of the requirements of workshops of all types.
- Food manufacturing plant - Be it a sandwich production line, meat processing plant or a frozen food manufacturer, the production of food stuffs must be done in such a way that external contaminants are prevented rather than extinguished. Prevention is better than cure as they say. Protecting floors from contamination from fungus and bacteria is definitely a must for all food preparation environments.
Features & Benefits
- Easy application.
- Good “wetting out” and penetration properties.
- Cures very well at low temperatures.
- 12-month shelf life.
New Concrete Floors
New Concrete must be at least 4 weeks old before considering coating the substrate or moisture less than 5%. The substrate should be clean, free from latience removed preferably by techniques which should include (depending on the degree of contamination) acid etching, light mechanical scrabbling, blasting, grinding or degreasing.
Existing Concrete Floors
Remove all dirt, oil, grease or other surface contaminants by enclosed shot blasting, scarification or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing.
Store between 15-25°C for at least 8 hours before use. The ambient temperatures of the areas should not be allowed to fall below 10°C throughout the application and curing period. Surface temperatures must be above 5°C, in cases where the temperature is higher than 30°C, the surface should be dampened with water. Apply by brush or short-medium pile roller ensuring the product is well worked into the surface.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- 5Kg Composite Pack covers 20-30m2 per coat (0.17 - 0.25Kg/m2 per coat). One coat is generally sufficient.
- Touch Dry
- Touch dry after 4 hours at 20°C. Through dry after 8 hours at 20°C. Recommended over coating after 12-18 hours.
Be the first to ask a question about this product!
Sikafloor 220 W Conductive is a two part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use.
Remmers PUR Aqua Top 2K SG is a water based, transparent sealant with a silk gloss for indoor areas suitable for all Remmers Epoxy and PUR coatings. It can also be used for fixating and sealing Remmers flake coatings. Water based, silk gloss, transparent, 2-component sealant with good resistance to UV-light and chemicals. Image already added
Coo-Var High Performance 2 pack Primer Sealer is an extra heavy duty coating ideal as a barrier or sealer coat if compatibility is a problem when coating an existing paint.
Resutack EP is a single pack bonding primer coat designed to provide instant strong bonding between bonding and substrate when used with epoxy coving systems. ADVANTAGES Apply wet on wet with no tack off time Solvent-free Low odour Can apply to many surfaces Excellent adhesion
Remmers Epoxy BS 2000 New is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System. Silk matt, low odour, resistant to alternating frost/thaw cycles. Ideal for warehouses, garages and car parks.
SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates. Used for priming, consolidating and sealing of absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues. Compatible with all SikaBond wood floor adhesives.
A two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. Designed to improve the adhesion of coatings and screed systems to substrates that have previously been contaminated with oils, that may still retain some residual contamination.
Sika Bonding Primer is a rapid curing, water based, two-component primer to consolidate substrates and enhance the adhesion of SikaRoof MTC, Sikalastic, Sikafloor and Sikagard products.
A two-pack, water-based primer which promotes adhesion on difficult and well worn surfaces prior to applying Blackfriar Professional and other epoxy floor paints.
R.S. Rapidprime is a two-pack solvent-free epoxy resin primer, designed for brisk overlaying with other resin-based systems. It is ideal for low temperatures and must be applied under 25°C. ADVANTAGES Can be overlaid in 3-4 hours Solvent-free Good adhesion Low odour Easy application Versatile use
Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
Sikafloor Comfort Porefiller is a 2-part, total solids, low VOC, PUR used as part of the Sika ComfortFloor Pro and Sika ComfortFloor Decorative Pro System that is a durable high quality compound used for sealing and levelling of the permeable surface of prefabricated Regupol rubber sheets.