402 Damp Proof Coating
  • 402 Damp Proof Coating

402 Damp Proof Coating

402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.

Colour
Size
£74.84
VAT excluded

£89.81 Tax incl.
Quantity

Description

402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.

402 Damp Proof Coating is a two pack epoxy resin based primer/coating, one or two coats may be applied depending on the degree of dampness present in the sub-floor. It is available in grey, red, and clear colours to allow control of uniform coverage, a Winter Grade version of this product is also available for applications in lower temperatures or when an especially quick return to service is required.

Advantages

  • Provides a surface damp-proof membrane
  • Allows rapid laying of floor toppings to power floated concrete
  • Solvent free, low odour
  • Coloured to monitor progress
  • Low viscosity, easily applied
  • Excellent adhesion
  • Surface tolerant
  • Excellent resistance to water, grease and oil
  • Can be used as a primer or finished floor coating

Recommended Uses

  • As a surface damp-proof membrane.
  • As a moisture suppressant on concrete and sand/cement screeds.
  • As a damp tolerant primer for concrete and resin screeds.
  • As a surface and damp tolerant floor coating.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Application
Brush, Roller, Spray
Coverage
3-4m² per kg
Touch Dry
6 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

SikaBond PVA+

SikaBond PVA+ is a general purpose economic adhesive, sealer and mortar improver for concrete, render and plasters. Reduces surface dusting and conforms to BS 5270 for internal plastering. Highly effective and easy to use building adhesive, primer, admixture, bonding agent, sealer and dustproofer. For use on a wide range of building jobs as a general...

Price £55.06
In stock

Remmers Epoxy UV 100 TX

Remmers Epoxy UV 100 TX (formerly Acolan Sediment Resin) is a thixotropic, transparent epoxy resin with little tendency to yellow used as a binder for flake and blinded coatings or as a pore filler on open-pored, epoxy resin screeds. Can be subjected to mechanical and chemical loads. Image already added

Price £319.50
In stock

RSL Resugrip

Resugrip is a high-build, pigment and solvent-free polyurethane floor binder for when anti-slip is essential. It is designed to be added to surface dressing with aggregates and is very hard-wearing. ADVANTAGES Good chemical resistance High bond strength Will cure at temperatures down to 5°C Coloured aggregates are available to make it decorative...

Price £120.29
In stock

Sikafloor ProSeal 90

Sikafloor ProSeal 90 is a curing and sealing compound for concrete floors. It is a one component Sikafloor product that has higher efficiency curing, sealing and hardening liquid and is suitable for exterior and interior application.

Price £318.88
In stock

SikaTop 50

SikaTop 50 is a water based primer used as part of the Sika EmotionFloor range for high absorbent substrates. Excellent adhesion on absorbent substrates, prevents loss of water into the substrate, economic, increases durability, resistant to alkaline pH, ready to use, easy to use, for substrates with higher moisture content. Particularly for use as primer...

Price £32.00
In stock

Remmers PUR Aqua Top M

Remmers PUR Aqua Top M is used as a matt finish coating on synthetic resin coating systems. This coating is especially suitable as a finish coat in schools, hospitals, car parks and various decorative applications. Flexible, UV resistant, low dirt adhesion, easy to clean, outstanding wear resistance.

Price £277.02
In stock

401 WG Epoxy Floor Primer

401 WG Epoxy Floor Primer is a fast curing version of 401 Epoxy Floor Primer designed to be used in lower temperatures or when a fast return to service is required. 401 WG Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its...

Price £82.93
In stock

Hydron Nu-Base Epoxy Floor Primer

Nu-Base Epoxy Floor Primer has been specifically-formulated to cure in damp conditions, making it an ideal choice to prime structures such as subways and multi-storey car parks, where moisture can linger. Upon proper application, this primer will act as a damp-proof membrane on the floor. Advantages Cures in damp conditions 3-5m²/KG coverage "Straw"...

Price £80.25
In stock

RSL R.S. Screed Seal Clear

R.S Screed Seal is a two-pack epoxy resin surface coating for use with other RSL and Sherwin-Williams products, filling any voids, pockets or interstices exposed in the surface. ADVANTAGES Enhances chemical resistance Prevents water spillage Improves cleanability Hygienic No shrinkage on curing Can be used decoratively Colour stability  Image...

Price £69.04
In stock

Smartkote EP90 Universal Epoxy Primer

Smartkote EP90 Universal Epoxy Primer, an easy to use two-pack primer for all polyurethane topcoats that provides excellent adhesion to a variety of substrates with the flexibility required for urethane. Pre-weighed components; simply add Part B to Part A and mix Easy to apply with low viscosity once mixed Fast drying – overcoat in 3-4...

Price £24.38
In stock

Sika Dustproofer

Sika Dustproofer is a ready to use dustproofer and concrete surface hardener for concrete floors, paths, driveways etc. Sika Dustproofer forms hard insoluble crystals binding together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving. Improves wear resistance, for garage, industrial and workshop floors.

Price £38.96
In stock

RSL Resustat Primer

Resustat Primer is designed to be applied prior to the use of Resustat ESM, Resustat SL23, Resustat TG69 or Resustat Terrazzo. It is a low viscosity epoxy primer with conductive fillers.  ADVANTAGES Conductive with very low electrical resistance Good adhesion Low odour High solids Easy to apply Image already added

Price £125.52
In stock

Remmers Epoxy ST 100 TX

Remmers Epoxy ST 100 TX is an un-pigmented thixotropic epoxy resin binder that is used as primer or as a pore filler on epoxy screeds. Thixotropic, plasticizer-free, withstands mechanical and chemical loads.

Price £234.63
In stock

Sikafloor Comfort Porefiller

Sikafloor Comfort Porefiller is a 2-part, total solids, low VOC, PUR used as part of the Sika ComfortFloor Pro and Sika ComfortFloor Decorative Pro System that is a durable high quality compound used for sealing and levelling of the permeable surface of prefabricated Regupol rubber sheets.

Price £194.55
In stock