Coo-Var Oil Tolerant Primer
  • Coo-Var Oil Tolerant Primer

Coo-Var Oil Tolerant Primer

103/Q228/1/R

Coo-Var Oil Tolerant Primer is a two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. Designed to improve the adhesion of coatings and screed systems to surfaces that have previously been contaminated with oils, that may still retain some residual contamination.

Product Features

  • Enables floor paints and resin finishes etc. to be applied onto concrete that has previously been contaminated with engineering oils.
  • Easily applied by brush, roller or trowel edge.
  • Can be applied onto substrates with hygrometer readings up to 85% RH.
  • Completely solvent free and low odour.
Colour
Size
£107.56
VAT excluded

£129.07 Tax incl.
Quantity

Description

Coo-Var Oil Tolerant Primer is a two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. It is essential that all surface and gross contamination is removed by cleaning with Coo-Var Oil Remover and Coo-Var Industrial Floor Cleaner.

Features & Benefits

  • Enables floor paints and resin finishes etc. to be applied onto concrete that has previously been contaminated with engineering oils .
  • Easily applied by brush, roller or trowel edge.
  • Can be applied onto substrates with hygrometer readings up to 85% RH.
  • Completely solvent free and low odour.

Coo-Var Oil Tolerant Primer can be used on concrete floors and fine concrete screeds, of not less than 50mm thick, in the case of unbonded screeds. Coo-Var Oil Tolerant Primer is designed to improve the adhesion of coatings and screed systems to substrates that have previously been contaminated with oils, and have been thoroughly cleaned but may still retain some residual contamination.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
103/Q228/1/R

Data sheet

Manufacturer
Coo-Var
Parts
Two
Base Type
Epoxy
Application
Roller
Pot Life (at 20°C)
50 Minutes
Coverage
4m² per KG
Recommended Thinner/Cleaner
Thinners 16
Touch Dry
24 Hours
Recommended Wet Film Thickness
220 Microns
UN Number
UN2735
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Sika Reactivation Primer

Sika Reactivation Primer is a one-component primer for the reactivation of existing Sika Roofing and Balcony systems. Used on Sikalastic 621 TC and Sikafloor 405/415 polyurethane systems. Features and Benefits  Allows further coats to be safely applied when the standard re-coating window has been exceeded Single pack Quickly and easily...

Price £76.54
In stock

SCHÖNOX VD

SCHÖNOX VD universal acrylic primer is for use prior to apply SCHÖNOX underlayments on porous and non porous substrates in interior areas. Suitable for pre-treating on walls and floors following the recommended dillution rates.

Price £66.97
In stock

Everbuild 908 DPM

A ready to use, odourless, rubber enriched bitumen emulsion providing a highly effective damp-proof membrane

Price £52.46
In stock

402 Damp Proof Coating

402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.

Price £74.84
In stock

Sikafloor 02 Primer

Sikafloor 02 Primer is a very low emission, ready to use, acrylate based special primer prior to applying levelling compounds for sound, smooth and non-absorbent substrates for interior use. It is suitable as a primer on many tight substrates, old subfloors with water-resistant adhesives residues, old sealed/coated substrates and fully-bonded...

Price £39.54
In stock

402 WG Damp Proof Coating

402 WG Damp Proof Coating is a fast curing version of 402 Damp Proof Coating designed to be used in lower temperatures or when rapid overcoating/access is required. Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes.

Price £85.05
In stock

Remmers Epoxy ST 100 LV

Remmers Epoxy ST 100 LV is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Ideal for use in workshops, parking garages, production halls, assembly areas and warehouses...

Price £413.73
In stock

Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid

Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete. Overcoatable after just 3 hours: apply primer and topcoat in one day Easy all-in-1 packaging For new and aged power floated...

Price £97.28
In stock

SikaTop 50

SikaTop 50 is a water based primer used as part of the Sika EmotionFloor range for high absorbent substrates. Excellent adhesion on absorbent substrates, prevents loss of water into the substrate, economic, increases durability, resistant to alkaline pH, ready to use, easy to use, for substrates with higher moisture content. Particularly for...

Price £32.00
In stock

Remmers Pore Filler

Remmers Pore Filler is a high-viscosity one component copolymer acrylate dispersion. This thixotropic transparent and non-yellowing synthetic grout is used to seal the pores of quartz or stone carpet floors.  Used to seal the pores of aggregate floors in toilets, kitchens After curing, a PU-topcoat or epoxy-topcoat can be applied. This is...

Price £145.98
In stock

Hydron Mona-Guard Dustproofer

Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting....

Price £26.60
In stock

Sikafloor ProSeal Pro

Sikafloor ProSeal Pro is a one part low odour clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Suitable for indoor or outdoor application. Click here for other Sikafloor products. Features and Benefits: One coat application Helps control dusting for both new and existing concrete floor...

Price £227.77
In stock

Britannia Epoxy Floor Primer

Britannia Epoxy Floor Primer will make light work of your hard porous floor surfaces, allowing for much better adhesion. Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required; this primer will form the perfect base in which to apply the coloured topcoat. Advantages Easy application...

Price £58.73
In stock

Remmers PUR Aqua Top M

Remmers PUR Aqua Top M is used as a matt finish coating on synthetic resin coating systems. This coating is especially suitable as a finish coat in schools, hospitals, car parks and various decorative applications. Flexible UV resistant Low dirt adhesion Easy to clean Outstanding wear resistance

Price £277.02
In stock

Remmers Epoxy ST 100

Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers.  Can be subjected to mechanical loads Can be subjected to chemical loads Good penetration...

Price £69.59
In stock

Hydron Mona-Guard Block Paving Sealer

The ideal solution to seal your paved driveway, with resistance to oil, weathering, UV and chemicals, you can have the peace of mind that the Mona-Guard Block Paving Sealer aids in delaying the age of your paving. Other Great Uses Footpaths. Garage forecourts. Town centres. Car parks.

Price £25.60
In stock