Coo-Var Floor Sealer
Coo-Var Floor Sealer is a low cost, clear, semi-gloss sealer for suitably prepared concrete, wood, metal and GRP.
- Low cost
- External/Internal use
- Prevents dusting
Coo-Var Floor Sealer is ideal where a low cost clear, semi-gloss sealer is required. It can be used internally and externally on suitably prepared concrete, wood, metal and GRP.
- Prepared concrete
Apply by brush or roller.
Brush wash/thinner: White spirit
Minimum 16 hours or overnight
Recommended Dried Film Thickness Per Coat: 50-60 microns
Recommended Wet Film Thickness Per Coat: 100 microns
Estimated coverage: 10-12m2/litre
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- 10-12m² per litre
- Touch Dry
- 4 Hours
|Dan on 08/07/2019|| |
I applied this to a newly self leveled floor 36 hours ago and it has turned the floor green. I am assuming some reaction has occurred to cause this. Any advice?
We would need to exactly which self levelling product was used to be able to advise, could you forward data sheets to our Technical Team to review on [email protected]
|Andy on 01/04/2019|| |
Could this be used to seal an outdoor concrete area which has been painted with masonary paint?
Provided that the Masonry paint is in good condition, sound, well adhered and is thoroughly cleaned beforehand, this should be fine.
|josie on 24/03/2019|| |
could this be used to coat over natural slate tiles ? I just moved house and the floor in the kitchen is natural slate. its constantly rubbing away. I know I can seal it but this means doing it every 6 months and I just don't have the time for it. I like the floor though and don't particularly want to get a whole new floor. I watched a video a while back someone doing some crazy flooring and it was topped with some gloss type looking stuff to finish. I was hoping this would do the same thing but over my slate tiles so I can just use it like a normal floor ???
Unfortuantely Coo-Var Floor Sealer would not be suitable for this application.
|Graham Burton on 26/02/2019|| |
What does "suitably prepared concrete" mean please?
All surfaces should be clean, dry, sound and free from contaminants.
Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months.
Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
A two-pack, specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with Blackfriar Professional High Traffic Floor Paint.
A primer exhibiting outstanding adhesion to damp concrete, the fast curing characteristics allow rapid application of subsequent MMA coatings, mortars or screeds from our range.
Remmers PUR Aqua Top M is used as a matt finish coating on synthetic resin coating systems. This coating is especially suitable as a finish coat in schools, hospitals, car parks and various decorative applications. Flexible, UV resistant, low dirt adhesion, easy to clean, outstanding wear resistance.
401 WG Epoxy Floor Primer is a fast curing version of 401 Epoxy Floor Primer designed to be used in lower temperatures or when a fast return to service is required. 401 WG Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its...
Ennis-Flint MMAXGRIP PRMX Primer is a 2-component, fast-reactive/fast-curing MMA-based (polymethyl methacrylate) resin primer used as a barrier on absorbent substrates in preparation for the later application of Ennis-Flint waterproofing or surfacing products. Easy to apply, very good adhesion on absorbent substrates, hydrolysis and alkali-resistant,...
Remmers PUR Top Plus is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels, with the inclusion of a slip resistant bead finish. Used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss...
Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting....
Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....
Sikafloor's 156 is a two part epoxy primer, levelling mortar and mortar screed. On its own it is a low viscosity, solvent free epoxy resin, that can be used for priming concrete substrates, cement screeds and epoxy mortars. Combined with Quartz Sands and Sika Extender T is becomes a levelling mortar and mortar screed.
The ideal solution to seal your paved driveway, with resistance to oil, weathering, UV and chemicals, you can have the peace of mind that the Mona-Guard Block Paving Sealer aids in delaying the age of your paving. Other Great Uses Footpaths. Garage forecourts. Town centres. Car parks.
Sikafloor 11 Pronto is a two part, medium-viscosity, fast curing primer based on reactive acrylic resins for the Sikafloor Pronto Modular System. Fast curing, medium viscosity primer to achieve a pore free cementitious substrate.
Sika Reactivation Primer is a one-component primer for the reactivation of existing Sika Roofing and Balcony systems. Used on Sikalastic 621 TC and Sikafloor 405/415 polyurethane systems.