- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend 402 Damp Proof Coating as a great alternative.
We no longer stock this product, but can recommend 402 Damp Proof Coating as a great alternative.
Blackfriar Professional Damp Proof Primer is a moisture suppresent membrane for priming damp concrete floors and screeds. It helps prevent residual moisture seeping from the substrate, allowing earlier application of floor coatings.
Preparation
Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete should be allowed to cure to a compressive strength of at least 25N/mm² and laitance removed before applying Blackfriar Professional Damp Proof Primer.
Application
Stir base thoroughly before adding all of the activator then mix well. DO NOT MIX PART UNITS. Discharge immediately after mixing. Pot life is 20-30 minutes at 20°C. Apply with a brush, squeegee or roller working the paint in any surface imperfections. If necessary de-aerate using a spiked roller within 20 minutes of application.
Even substrates up to 90% relative humidity with existing subfloor Blackfriar Professional Damp Proof Primer can normally be satisfactorily stabilised by single coat application at a minimum dosage of 0.33L/m² (plus allowance for surface profile etc) to give a minimum overall thickness of 0.33mm at profile peaks. If in doubt apply a two coat system as below. Substrates up to 100% relative humidity and all rough surfaces should receive a minimum of two coats as follows:
First coat – Apply a full even coat at a minimum dosage of 0.26L/m² (plus allowances for surface profile, etc.) to give a minimum overall thickness of 0.25mm at profile peaks. Allow product to set before overcoating.
Second/subsequent coats – Apply a full even coat at right angles to the preceding coat at a minimum dosage of 0.2L/m² (plus allowances) to give a minimum overall thickness of 0.2mm). If necessary, apply a full dry silica sand scatter (nominal 60 mesh) to the wet final coat to assist adhesion of subsequent products. Do not apply at surface temperatures below 10°C or if overnight ambient temperatures are below 5°C.
Drying Time
6-16hrs @20°C. Allow to dry for a minimum of 16hrs @20°C and maximum 48 hrs @20°C between coats. Full cure is achieved in 5-7 days @20°C.
Clean Up
Small spillages can be cleaned up with Xylene. Allow brushes and rollers to cure and dispose of. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.
Product Features
- Designed to allow earlier access to concrete, screed, tile, vinyl and wood surfaces.
- Suppresses residual moisture to provides a low vapour diffusion rate surface damp proof membrane.
- Indoor and outdoor use.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Data sheet
- Manufacturer
- Blackfriar Professional
- For Use On
- Concrete, Screed, Vinyl, Wood
- Application Method
- Brush, Squeegee, Roller
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Parts
- One
- Base Type
- Solvent Based
- Interior/Exterior Use
- Interior and Exterior
- Application
- Roller
- Pot Life (at 20°C)
- 20-30 mins
- Coverage
- 4.5m² per litre
- Recommended Thinner/Cleaner
- Do Not Thin
- VOC
- 500g/litre
- Touch Dry
- 6-16 Hours
- UN Number (Activator)
- UN3066
- UN Number (Base)
- UN3082
- Brand
- Blackfriar
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Blackfriar Professional Damp Proof Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT