Remmers PUR Aqua Top 1K is a single component, glossy, clear fixation layer and sealant for indoor areas used for transparent fixation and sealing of flake covers. PUR Aqua Top 1K is a water based, glossy, transparent, non-yellowing, fast drying, single component sealant. Image already added
403 Oil Tolerant Primer
Developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings.
Developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings. Exhibits outstanding adhesion to concrete and other substrates, and is particularly suitable where compromised surfaces exist.
• Solvent free, low odour
• Excellent adhesion to concrete and steel
• Surface tolerant, easily applied
• Excellent wetting properties
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 2.5m² per KG
- Touch Dry
- 8 Hours
- Brush, Roller
Be the first to ask a question about this product!
Remmers Epoxy UV 100 is a UV-protected, transparent, epoxy resin with a wide application spectrum. It is used for decorative pebble or Color Quartz covers, for fixating flake coatings and as a glossy, thick layer sealant on decorative substrates. Ideal for workshops, fabrication halls, exhibition or assembly rooms, retail and wholesale areas...
This product is now only available with a minimum order of 800 litres. For an alternative, please contact our sales team on 0113 2455450 or via the contact form. Jotun Jotafloor Sealer is a sealer/primer for all Jotafloor products. Specially designed for use independently as a dust binder for concrete floors. Recommended for warehouses,...
404S Epoxy Metal Primer is a two pack, high solids, epoxy, anti-corrosive primer designed for the protection of steelwork, aluminium and galvanizing. Whilst optimum performance will only be achieved by applying to well prepared substrates, It will adhere well to minimally prepared surfaces and has a long overcoating window, and provides excellent...
401 WG Epoxy Floor Primer is a fast curing version of 401 Epoxy Floor Primer designed to be used in lower temperatures or when a fast return to service is required. 401 WG Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its...
Bradite Floor Primer is a clear coating solution to prime power floated, non-porous concrete and quarry tiles ready for top coating. Excellent for food areas due to it's low-odour and non-taint solution. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Primer and topcoat can be applied the same day...
A single pack, clear floor sealer to help with the prevention of dusting. Ideal where a low cost sealer is required for interior or exterior use on suitably prepared concrete, wood and metal.
402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s Resistant...
Remmers Epoxy BS 2000 New is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System. Silk matt, low odour, resistant to alternating frost/thaw cycles. Ideal for warehouses, garages and car parks.
Coo-Var Dampshield is a gas permeable epoxy resin membrane tolerant of residual moisture in concrete floor, enabling earlier covering. ADVANTAGES Enables resin finishes sooner Easy application Can be applied to substrates with hygrometer readings up to 97% RH Solvent free Low odour
R.S. Dampshield is a two-component epoxy resin primer. which enables floor coverings such as carpets, tiles, wood and vinyl to be applied sooner. It allows concrete to dry faster, combating the residual moisture in your concrete floor. ADVANTAGES Easy application Solvent-free Low odour Excellent adhesion Image already added
401 Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its own right. Used to maximise the performance, adhesion and spreading rates of our systems it can even be applied to damp concrete.
Resutack PU is a single pack bonding primer coat designed to provide instant strong bonding between bonding and substrate when used with polyurethane coving systems. ADVANTAGES Apply wet on wet with no tack off time Solvent-free Low odour Can apply to many surfaces Excellent adhesion
Nu-Base PU Floor Seal is a specially-formulated floor sealer that protects the concrete or brick surface from absorbing foreign material, such as oil, grease, dirt, water and a wide range of chemicals. Advantages Hard-wearing and chemical resistant Clear finish Perfect for factories, car parks, garages and driveways