314 Clear Floor Sealer
A single pack, clear floor sealer to help with the prevention of dusting. Ideal where a low cost sealer is required for interior or exterior use on suitably prepared concrete, wood and metal.
314 Clear Floor Sealer is a single pack, clear floor sealer to help with the prevention of dusting. Ideal where a low cost sealer is required for interior or exterior use on suitably prepared concrete, wood and metal.
Features & Benefits
• Cost effective
• Interior or exterior use
• Quick drying and easy to apply
- Typical Coverage (per coat)
- 10m² per litre
- Touch Dry
- 4 Hours
- Brush, Roller
|Joanna on 04/08/2018|| |
It this 314 Clear Sealer meant to be a tan brownish coloured liquid?
In the tin yes, stir well and apply and the product dries clear.
Remmers PUR Top Plus is a range of thin film polyurethane seal coats for synthetic resin coatings with exceptional scratch resistance. The products are available in three gloss levels, with the inclusion of a slip resistant bead finish. Used to impart a tough lacquered finish to resin floors to minimise scratching, impart specific matt/gloss...
Nu-Base PU Floor Seal is a specially-formulated floor sealer that protects the concrete or brick surface from absorbing foreign material, such as oil, grease, dirt, water and a wide range of chemicals. Advantages Hard-wearing and chemical resistant Clear finish Perfect for factories, car parks, garages and driveways
Provides a clear, glossy, tack free surface, even in cool, damp conditions. Cures rapidly and is a versatile, chemical resistant sealer/clear coating for concrete and our range of epoxy screeds and mortars.
Sikafloor 01 Primer is a very low emission, universal dispersion primer prior to applying leveling compounds. Suitable for pre-treating on walls and floors following the recommended dilution rates. For interior use.
R.S. Oil Tolerant Primer is a two-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. ADVANTAGES Easy application Application onto substrates with engineering oil contamination Excellent adhesion Low odour High solids Image already added
Remmers Epoxy ST 100 TX is an un-pigmented thixotropic epoxy resin binder that is used as primer or as a pore filler on epoxy screeds. Thixotropic, plasticizer-free, withstands mechanical and chemical loads.
Remmers QP Top Plus is a slip-resistant sealant with a very short reaction time used as a sealant in the Remmers QP System. High UV resistance, full curing at temperatures from 0°C, silk gloss surface, can be subjected to mechanical loads, slip-resistant.
A primer exhibiting outstanding adhesion for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.
Sikafloor 02 Primer is a very low emission, ready to use, acrylate based special primer prior to applying levelling compounds for sound, smooth and non-absorbent substrates for interior use. Sikafloor 02 Primer is suitable as a primer on many tight substrates, old subfloors with water-resistant adhesives residues, old sealed/coated substrates and...
Remmers Epoxy BS 2000 Transparent is a water emulsifiable, epoxy resin for versatile use, used as an impregnation agent or adhesion promoter in surface protection systems. It can also used as a bonding layer worked wet-on-wet in combination with levelling compounds or epoxy resin systems. Ideal for warehouses, garages, parking garages, balconies.
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or etching A...
SCHÖNOX SDG is a very low emission special dispersion primer ready for use, suitable for the fast pre-treatment of unheated cementitious screeds with increased residual moisture up to 4.0 CM-% (85%-rh).
The ideal solution to seal your paved driveway, with resistance to oil, weathering, UV and chemicals, you can have the peace of mind that the Mona-Guard Block Paving Sealer aids in delaying the age of your paving. Other Great Uses Footpaths. Garage forecourts. Town centres. Car parks.
SikaBond Waterproof PVA is a waterproof vinyl acetate polymer especially formulated for exterior use as an adhesive and sealer. Suitable for brickwork, mortar, render, screed and plaster. Easy to use and unlike normal PVA it will not re-emulsify when wet. Excellent for renders or toughening floors and screeds. Suitable for brickwork, mortar, render,...