• 306 Self Levelling Floor Coating
  • 306 Self Levelling Floor Coating

306 Self Levelling Floor Coating

RAW306

306 Self Levelling Floor Coating is a 2-3mm, self-levelling, epoxy screed. Designed to provide a hard wearing, impervious, seamless floor finish which is hygienic and easy to clean.

  • Fast application and cure
  • Available in a range of colours
  • Three pack product
  • Excellent chemical resistance
  • Very good adhesion to concrete
  • Suitable for use in laboratories, pharmaceutical plants, hospitals, food preparation areas, electronic assembly factories, etc
  • Images are for illustrative purposes only and may differ from the actual product
  • Click to jump down to Technical Data
Ordering References Weight Min. Order Quantity Shipping
Ready Mixed Colours 25KG 1 Next working day delivery, if ordered before 11am
RAL Classic and BS4800 Colours 25KG 2 4-5 working day lead time
BS381C, RAL Design, NCS 25KG 3 5-7 working day lead time

**Available for delivery - see Delivery Options below**

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£126.36
VAT excluded

£151.63 Tax incl.
Quantity

Description

306 Self Levelling Floor Coating is a 2-3mm, self-levelling, epoxy screed. 306 Self Levelling Floor Coating has been designed to provide a hard wearing, impervious, seamless floor finish which is hygienic and easy to clean.

306 Self Levelling Floor Coating with its combination of attractive finish and excellent resistance to many chemicals, is suitable for a wide range of industrial environments.

306 Self Levelling Floor Coating is typically applied at thicknesses of between 2 and 3mm. It is supplied as a three pack product, consisting of an epoxy resin component, a curing agent component and a graded filler component, all pre-weighed and ready for mixing.

Suitable for use in laboratories, pharmaceutical plants, hospitals, food preparation areas, electronic assembly factories, etc.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Self-Levelling
  • Hard wearing
  • Seamless
  • Hygienic and easy to clean
  • Attractive finish
  • Excellent resistance to many chemicals
  • Suitable for a wide range of industrial environments
  • Three pack product
  • Fast application and cure
  • Very good adhesion to concrete
  • Range of colours available



Typical Properties


Technical Data
  306 Self Levelling Floor Coating
Pot Life: 50 minutes @ 20°C
Compressive Strength: 60 MPa
Flexural Strength: 34 MPa



Chemical Resistance
Chemical Resistance
20% Hydrochloric Acid Excellent
10% Sulphuric Acid Excellent
20% Sodium Hydroxide Excellent
Petrol Excellent
Lactic Acid Excellent
Bleach Excellent



Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.



Coverage


  • A 25kg pack is sufficient to cover an area of 7m² at a thickness of 2mm



Surface Preparation


  • All surfaces should be sound, clean, and free from dust, dirt, laitance, oil and other contaminants
  • All laitance must be removed by vacuum grit blasting ensuring that any residual dust is removed
  • New concrete surfaces must be a minimum of 21 days old and/or have a residual moisture content below 6%
  • Steel substrates shall be grit blasted to Sa 2.5 Swedish Standard, and degreased using 109 Tool Cleaner

Note: Substrates with high moisture content or oil contamination can still be coated in most instances by the inclusion of one of our specialist primers.

Please see 402 Damp Proof Coating and 403 Oil Tolerant Primer for full details.



Priming:

  • Prime the prepared surfaces using 405 Tack Primer, applying the material at a nominal rate of 5m²/kg
  • Allow the primer to cure overnight

Note: If the surface is exceptionally porous it may be necessary to 'double prime'.



Mixing:

  • 306 Self Levelling Floor Coating is supplied as a three component product, each component being preweighed ready for use
  • The contents of the curing agent container should be drained into the base component and the two materials thoroughly mixed
  • The mixed liquid should then be poured into a forced mixer, e.g. Mixall, Pennine or Creteangle, and the filler component slowly added under constant mixing until a uniform consistency has been achieved



Mixing Ratio:

  • By Volume = 3 Base : 1 Curing Agent
  • By Weight = 100 Base : 35.1 Curing Agent



Application


  • Apply the mixed 306 Self Levelling Floor Coating by serrated trowel or screed box
  • Within 20 minutes, spike roller the 306 Self Levelling Floor Coating in order to de-aerate it
  • Existing joints in the floor must be carried through the screed
  • Always maintain a wet edge to the material during application



Cleaning




Curing


  • Light foot traffic may be allowed after 24 hours drying @ 20°C and full trafficking after 48 hours @ 20°C
  • Optimum chemical resistance will be achieved after 48 hours @ 20°C

Note: At higher temperatures the above cure times will be reduced, at lower temperatures they will be increased



Limitations


  • Do not apply to uncured or contaminated surfaces
  • Do not apply at temperatures of 5°C or less



Storage & Shelf Life


  • Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
  • 306 Self Levelling Floor Coating has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions



Health & Safety


  • Avoid contact of the material with skin and eyes
  • Wear gloves and goggles
  • Wash off splashes immediately with soap and water
  • Any eye contamination must be rapidly irrigated with copious amounts of water, and immediate medical attention sought
  • Please refer to Material Safety Data Sheet for additional Information
  • 306 Self Levelling Floor Coating shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Product Details
RAW306

Data sheet

Manufacturer
Rawlins Paints
Interior / Exterior Use
Interior
Water / Solvent Based
Solvent
For Use On
Concrete, Steel
Application Method
Trowel, Spiked Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Three-Pack
Pot Life (at 20°C)
50 mins
Coverage
7m² per 25KG
Touch Dry
24 Hours
UN Number
UN3082, UN2735
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Tonny Hallam on 2018-08-22 10:20:25
Question: 

what would you recommend for the cleaning of equipment i.e mixing drum?

Answer: 

Clean equipment with 109 Tool Cleaner prior to curing of the coating.


Question about the product

* Required fields
(read)
Send
You might also like

403 Oil Tolerant Primer

403 Oil Tolerant Primer has been developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings. The product exhibits outstanding adhesion to concrete and other substrates and is particularly suitable where compromised surfaces exist. Solvent free, low odour Excellent adhesion to concrete and...

Price £82.93
In stock

405 Tack Primer

405 Tack Primer is an adhesion promoted primer developed for use in conjunction with various epoxy coatings and screed in our range. Solvent free, low odour Excellent adhesion to concrete and steel Impervious to water Low viscosity, easily applied May be applied to cool, damp surfaces Pre-packaged units ready for use Very good...

Price £22.33
In stock

109 Tool Cleaner

109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable Images are for illustrative purposes only and may differ from the actual product Click to jump down to Technical Data...

Price £30.62
In stock

402 Damp Proof Coating

402 Damp Proof Coating is a two pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. Provides a surface damp-proof membrane Allows rapid laying of floor toppings to power...

Price £74.42
In stock