- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
OPEN AS USUAL DURING LOCKDOWN #3
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Hydron Nu-Base Chlorinated Rubber
HPC 129
A perfect solution for leisure centres looking to provide an ultra hard-wearing coating that is fast-drying and can withstand a wide range of spillage, including oil. The Nu-Base Chlorinated Rubber is developed for external use on metal and concrete.
Advantages
- Good adhesion
- Extremely hard-wearing
- Fast-drying
- RAL colours available
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
**Available for delivery - see Delivery Options below**
Description
Nu-Base Chlorinated Rubber is a colourful finish specially-formulated for use on metal and concrete. The formulation of this coating is a strong and resilient thermoplastic resin that provides brilliant adhesion to many different surface uses, found in these industries:
- Leisure.
- Agricultural.
- Healthcare.
- Road Maintenance (road markings).
Features & Benefits
- Good adhesion, for use on concrete and metal.
- Durable for external use.
- Extremely hard-wearing.
- RAL colours available.
- Good resistance to petrol, paraffin and mineral oil spillage.
- Fast-drying.
- 12-month shelf life
Preparation
All surfaces to be coated should be clean, dry and free from oil and grease etc. Ideally the substrate should be shot-blasted, mechanically abraded or acid etched with all loose, flaking materials and any laitance removed.
Application
By brush/roller. Paints should be used as supplied, thinning is not recommended. All equipment should be cleaned with Nu-Base Chlorinated Rubber Thinners. Conventional thinners and brush cleaners are not effective.
Recommended storage is in a cool, dry place with temperatures between 10-15°C, and in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
Product Details
HPC 129
Data sheet
- For Use On
- Metal, Concrete
- Application Method
- Brush, Roller
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Application
- Brush, Roller
- Dry to Recoat (at 20°C)
- 12 hours
- Coverage
- 10–12 m² per litre.
- Touch Dry
- 30-45 [email protected] 20°C
- UN Number
- UN1263
 Kevin Gay on 2019-05-30 14:36:49 | Question:
Hi , is this good choice for a kennel floor , it's going on top of sika 30 leveler . thanks |
Answer:
Yes, this is a good floor coating exhibiting hard wearing qualities. | |
