Britannia Playground Paint is a water-based paint for tarmac and concrete playgrounds, both indoors and outdoors. It has slip resistant properties and is available in a range of bright colours.
Britannia Playground Paint is eco-friendly, and can be applied via brush, roller or spray.
Surfaces that are cold – below 5°C – are not suitable for coating. Hot surfaces – above 30°C – should be cooled with water spray before application otherwise paint will dry before film formation is completed
Apply an even coat either by brush, roller or by airless spray
Tip size of 28 Thou is recommended for airless spray
A new macadam surface should be left to oxidise for at least four weeks (longer in winter than in summer) before painting
Not suitable for use on open graded macadam or other materials incorporating “cut back” bitumen
New concrete should be allowed to mature for several months before coating
Initial play on the surface:
Britannia Playground Paint should be applied during the summer months, when surfaces should be left to dry for approximately 2-4 hours before they are re-opened for use
At the beginning and towards the end of summer, when temperatures are cooler and drying can take longer, it is advisable to extend this period by 1-2 hours or even overnight depending on the prevailing weather
Cleaning
Clean all equipment immediately with water after use
Shelf Life & Storage
Up to 12 months if stored correctly in an unopened container
Store above 5°C
Precautions
Keep out of reach of children
In case of contact with eyes wash immediately with plenty of water
Remove splashes from skin with soap and water or a recognised hand cleaner
Protect from freezing
Do not apply paint if there is a risk of heavy rain or frost
Do not use near fishponds
Product Details
TCP
Data sheet
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Water
For Use On
Tarmac, Concrete
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5L, 20L
Application
Brush, Roller, Spray
Coverage
6-8 square metres per litre for spray application. 2-3 square metres per litre for brush or roller application. Dependent on substrate, texture and porosity of the surface. Apply 2 coats.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
We wish to use playground paint on brick steps as well. Would this be k and which bidet/sealer shud we use?
Answer from Rawlins’ Technical Team:
No we would not recommend using this product for the steps, assuming the brick steps are clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Smartkote Protectakote UVR.
This is an anti-slip paint.
A on 2020-07-02 07:32:28
Question:
in the application instructions it mentions a binder, what would be used for this? thanks
Answer from Rawlins’ Technical Team:
Assuming this is to be applied to a playground and the sunstrate is compatible, clean, dry and sound we can recommend Britannia Decatone Macadam Binder for this application.
Sa'adiah on 2019-04-19 12:44:20
Question:
What type of paint brush is best suited to use with this paint?
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
Steve Cunneen on 2021-08-06 20:23:56