• Touch dry in 2-4 hours, dependent on ambient temperature, minimum over coating time of 16-24 hours

NOTE: Low temperatures can significantly extend the drying time.

Preparation

All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.

• New concrete should be allowed to mature for a minimum of 6 months before paint can be applied
• Chemically or mechanically hardened floors may need abrasion, prior to application
• If in doubt always test a small area prior to use

Application

• Stir well before use
• Please follow the coverage rates shown in Spreading Rate Section
• Coverage will vary dependent on the nature and porosity of the substrate and the application method
• Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry
• Britannia Floor Paint is touch dry in 2-4 hours dependent on ambient temperature
• Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours

NOTE: Low temperatures can significantly extend the drying time.

Cleaning

• Clean all equipment with white spirit immediately after use

Shelf Life & Storage

• Up to 2 years if stored correctly in an unopened container

Precautions

• Flammable keep away from sources of ignition
• Ensure good ventilation during application
• Wear gloves, goggles and suitable protective clothing
• In case of contact with eyes rinse immediately with plenty of water and seek medical advice
• Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
• Keep out of reach of children
• Do not use near fishponds
• Toxic to aquatic organisms
• May cause long term adverse effects in the aquatic environments
• Do not empty into drains