Bradite Floor Finish

CF22

Bradite Floor Finish is a chlorinated rubber floor paint developed for concrete and steel floors. With a multitude of uses, the end result is a tough colourful floor.

Advantages

  • Available in more than 350 colours in RAL & BS
  • Abrasion resistant
  • Water, chemical and oil repellent
  • Resists fungal growth
  • Available in RAL and BS colours
  • ISO 9001:2008 & ISO 14001:200

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

**Available for delivery - see Delivery Options below**

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£77.98
VAT excluded

£93.57 Tax incl.
Quantity

Description

Bradite Floor Finish is a single pack chlorinated rubber floor paint developed for concrete and steel floors, providing a tough protective film over the floor. Once cured, the floor will have excellent protection from chemicals and oils and will also repel water.

Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems. 2004/42/EC EU limit value for this product (cat.A/i sb): 500g/l (2010). This product contains max.498 g/l VOC.


Features & Benefits

  • Available in more than 350 colours in RAL & BS
  • Ideal for concrete and steel floors.
  • Provides a tough abrasion resistant film.
  • Excellent water repellency.
  • Highly resistant to chemicals and oils.
  • Resists growth of fungus
  • High build solution.
  • Dries quick.


Preparation

Substrates should be dust free and completely dry before coating. When painting concrete it is vital to ensure that the substrate is completely dry and free of laitance. Power floated, shiny or unpainted non porous concrete floors should be thoroughly vacuum blast cleaned to a roughness profile of 30-50 microns, or acid etched using Bradite TA37, or primed using Bradite Floor Primer ES40. Please consult the product data sheet for more details.

High pressure water cleaning should be utilised to remove all loose and flaking paint and contamination back to a sound substrate. Bradite TD39 industrial strength detergent should be used if necessary to remove all grease and oil. Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge. Cracks and pits should be filled using a suitable screed or mortar before painting.

Painting System

For application on concrete or other absorbent substrates, the first coat should be thinned 15-20% with Bradite Thinner TC32 to allow penetration into the substrate.

1st coat: Floor Finish CF22 (thinned, if required)

2nd coat: Floor Finish CF22

3rd coat: Floor Finish CF22

For maintenance painting the 1st coat will be a touch up to bare areas. While the coating will take light foot traffic after overnight drying, full cure may take 4 days at 20⁰C, and should not be subject to heavy traffic for at least 24 hours. Please note that drying/curing times will vary depending on film thickness, temperature and relative humidity.

Notes: Chlorinated Rubber Floor Paint CF22 is suitable for use with Bradite Low Slip Additives SA14 or SA12, which can be either incorporated into the paint or hand broadcast into the applied wet paint: - Incorporation Bradite Low Slip Hard Aggregate SA14 should be added to the paint and mixed thoroughly just before use at a rate of 1 x 250ml SA14 tin (375g) per 5 litre of paint.

Bradite Low Slip Soft Aggregate SA12 should be added to the paint and mixed thoroughly just before use at a rate of 1 x 250ml SA12 tin (110g) per 5 litre of paint. - Hand Broadcast Bradite Low Slip Aggregate SA14 should be scattered over the first coat while it is still wet at a rate of 0.5 - 1.0 kg/m² . When dry, excess low slip additive should be brushed off before application of the final coat. Bradite Low Slip Soft Aggregate SA12 should be scattered over the first coat while it is still wet at a rate of 0.2 - 0.5 kg/m² . When dry, excess low slip additive should be brushed off before application of the final coat. The end user and applicator must ensure that the finished floor is safe against slips in all likely usage conditions.


Application

Application and use should always conform to the codes of practice described in BS 6150 and BS 5493 Brush and Roller – supplied ready for use. Thin, if required, with 0 - 5% Bradite Thinner TC34. Conventional Air Spraying – Not recommended Airless Spraying – Not recommended

Clean all equipment immediately after use with Bradite thinner TC32 for best results.

Product Details
CF22

Data sheet

For Use On
Concrete, Steel
Application Method
Brush, Roller, Spray
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller, Spray
Coverage
10m2 per Litre
Touch Dry
1 hour
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send