Rust-Oleum 7100 Floor Coating

7142.2.5

Rust-Oleum 7100 Floor Coating is a quick drying, solvent-based, Alkyd gloss floor paint designed for use on interior and exterior concrete over 2 years old.

  • Abrasion resistant
  • For interior and exterior foot traffic
  • Apply to metal and wood
  • Great hiding power
  • Decorative colour range
  • Also available as an anti-slip version

Colour
  • Current colour: Clear Ivory - RAL 1015
Choose a colour
Close colour picker
  • Transparent
  • Traffic Blue - RAL 5017
  • Reseda Green - RAL 6011
  • Moss Green - RAL 6005
  • Clear Ivory - RAL 1015
  • Traffic Yellow - RAL 1023
  • English Red
  • Black - RAL 9005
  • Light Grey - RAL 7035
  • Steel Grey - RAL 7001
  • White - RAL 9010
Size
Finish
£17.24
VAT excluded

£20.68 Tax incl.
Quantity

Description

Rust-Oleum 7100 Floor Coating

Rust-Oleum 7100 Floor Coating is an easy to apply solvent based Alkyd floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. Rust-Oleum 7100 Gloss Floor Coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.

Recommended Uses

  • Wood surfaces
  • Concrete over 2 years old
  • On old, good adhering coatings
  • Metal floors that have been primed
  • Do NOT apply on smooth/dense concrete that contains a damp-repellent additive.

Technical Data

  • Density: 1,0 - 1,1 kg/l
  • Gloss Level: Gloss
  • Solids content in volume: 36 - 40 %

Drying Times At 20°C/RH 50%

  • Touch dry: 6 hours
  • Dry to recoat: 24 hours
  • Fully cured: 1 week

Theoretical Consumption

8,0 m²/l at 50 µm dry

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Rust-Oleum 7100 Floor Coating is available in two versions, standard and anti-slip (Rust-Oleum 7100NS Anti-Slip Floor Coating). Rust-Oleum 7100 Floor Coating can also be applied on old good adhering coatings and onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
7142.2.5

Data sheet

Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Solvent
For Use On
Metal, Wood
Application Method
Brush, Roller
Sheen
Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
2.5L, 5L
Application
Brush, Roller
Dry to Recoat (at 20°C)
24 Hours
Fully Cured (at 20°C)
1 Week
Coverage
8m² per litre
Density
1,0 - 1,1 kg/l
Solids by Volume
36 - 40 %
VOC
456 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
6 Hours
Recommended Dry Film Thickness
50 µm
Recommended Wet Film Thickness
130 µm
UN Number
Not regulated
Consumption
8,0 m²/l at 50 µm dry
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Mark on 2018-11-24 16:31:54
Question: 

Can I cover concrete print As I no longer like colour

Answer: 

Rust-Oleum 7100 Floor Coating should be OK to be applied to this kind of surface, but if usage will include parked cars and therefore the possibility of hot tyre pick up, we would only say yes with a thorough grind of the surface beforehand.

questions Fran Holland  on 2018-10-14 11:47:07
Question: 

Can this be used outdoors to paint concrete patio slabs? Thanks

Answer: 

Technically yes, but we would recommend Rust-Oleum Tarmacoat as a more suited product for this type of application.

questions Jackie  on 2018-08-24 00:46:39
Question: 

Could I use this product on a concrete kitchen work surfacethat has been sealed?

Answer: 

No, the only product we have offer for worktops is Rust-Oleum Worktop Transformation Kit.


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum 7100NS Anti-Slip Floor Coating

Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...

Price £34.36 Regular price £38.18
In stock