Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Tor Tortread SP Floor Paint is a single-pack general purpose, light duty floor coating for use in warehouses, factories, work shops, garages, showrooms etc.
Tough urethane alkyd blended with long oil alkyd, pigmented, and thinned with low aromatic white spirit
Easy to use, versatile, and quick drying for general use on bare or previously painted floors
4,300+ colours in RAL, BS, NCS and the new NCS 2050 shades
Bare Concrete: Ensure dry (less than 5.5 on protimeter screed scale). Surfaces should be cleaned by best available method to remove laitance, oils, etc. and to “open up” substrate (eg. vacu-blast, disc grind, scabble, acid etch etc, hot compressed air treatment for deep oil removal). Apply Tor Stabilising Sealer to prepared surfaces
Previously Painted: Perform adhesion check. If suspect – remove existing paint. If sound – wash, degrease and abrade. Apply Tor Stabilising Sealer to bare areas only
Coverage rate 10 square metres per litre per coat (reduce theoretical coverage by approximately 20%)
2 coats normally required
4,300+ colours in RAL, BS, NCS and the new NCS 2050 shades
Preferred short pile roller but can be airless sprayed (0.015” tip and 2000 psi atomising pressure)
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Tortread SP Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application. More Information Delivery Info
Tor SP Stabilising Sealer is a low viscosity alkali resistant solution for binding/stabilising friable and highly porous masonry surfaces prior to finishing in conventional masonry paints, and as a sealer/surface stabiliser on bare concrete floors prior to finishing in Tortread SP Floor Paints.Urethane alkyd resin solution in low aromatic...