Axalta Highway Anti-Skid Traffic Paint
  • Axalta Highway Anti-Skid Traffic Paint

Axalta Highway Anti-Skid Traffic Paint

09HAST

Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system.

  • The coating is coloured with chemical and weather resistant pigments
  • Developed as a traffic line / parking bay paint with low-slip properties
  • Suitable for application to asphalt, concrete, block paving and some wooden floors
  • This product is subject to a 10 working day lead time and minimum order quantities.
  • Please contact our sales team on 0113 2455450 or [email protected] for more information


Shipping Options (Select at Checkout):

Economy Shipping (10-14 Working Days): £10 +VAT

Colour
  • Current colour: White
Choose a colour
Close colour picker
  • White
  • Black
  • Yellow
  • Bold Red
  • Green
  • Blue
  • Admiralty Grey
  • Venetian Red
Size
£110.78
VAT excluded

£132.94 Tax incl.
Quantity

The minimum purchase order quantity for the product is 13.

Description

Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system, containing high quality, pre-dispersed aggregate. The coating is coloured with chemical and weather resistant pigments.

Axalta Highway Anti-Skid Traffic Paint has been developed as a traffic line / parking bay / road marking paint with low-slip properties, suitable for application to asphalt, concrete, block paving and some wooden floors.

  • Recommended Film Thickness: 159µm WFT / 70µm DFT
  • Theoretical Spreading Rate: 6.2m² per litre
  • Application Method: Brush / Roller

Surface Preparation

Surfaces to be coated, inside or outside should be clean, dry and free oil, grease, laitance, dust and other contamination. Do not apply to damp surfaces or fresh concrete. Compatible with most surfaces as recommended, but due to the wide variety of substrates available, a small test area is recommended to confirm compatibility. Adhesion should be checked, test patches should be left for 7 days before assessment is made.

Usually sold as a single system - in most instances, apply 2 full coats.

Limitations

  • Do not apply when RH exceeds 85% or the surface is less than 3°C above dew point.
  • Do not use on asphalt surfaces where cracks are visible.
  • On asphalt, applications in excess of 150µm WFT per coat should be avoided, with a maximum of 2 coats applied.
  • On coarse asphalt, it is essential that the pits are not filled with the coating.
  • This product is subject to a 10 working day lead time and minimum order quantities.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
09HAST

Data sheet

Interior / Exterior Use
Exterior
For Use On
Asphalt, Concrete, Block Paving
Application Method
Brush, Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
16L
Application
Brush, Roller
Coverage
6.2 m2 /litre
Coverage
6.2m² per litre
Recommended Thinner/Cleaner
No.5 Thinner
Solids by Volume
44 ± 2% (varies with colour)
VOC
473 + 20 g/litre (varies with colour)
Shelf Life (from date of manufacture)
Minimum 12 months if stored as above in unopened containers
Touch Dry
15 mins
Recommended Dry Film Thickness
70 µm
Recommended Wet Film Thickness
159 µm
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send