Mona-Guard Revive is a solvent free product based upon a combination of acrylic, hydrophobic and oleophobic chemistry that provides a restorative, decorative and flexible protection to existing tarmac and concrete surfaces.
Avoids expensive resurfacing, enhances durability, water repellence, resistance to oil penetration, dirt, stains and more with up to 10 years product performance
For use externally upon domestic, commercial or industrial areas including driveways, footpaths, pavements and car parks
Mona-Guard Revive is a solvent free product based upon a combination of acrylic, hydrophobic and oleophobic chemistry that provides a restorative, decorative and flexible protection to existing tarmac and concrete surfaces.
Coverage rate dependant upon the surface porosity. Average coverage in the region of 2-4m² per litre
For use externally upon domestic, commercial or industrial areas including:
Driveways
Footpaths
Pavements
Car Parks
Preparation
Ensure surfaces to be treated are clean, dry, free from frost, laitance, oil, grease and all dust, loose and friable materials must be completely removed before application of Mona-Guard Revive.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi there! I have a sloping tarmac driveway and a quarter of my cellar is under this driveway. The tarmac on the driveway is quite old and water seems to be seeping through it into my cellar. I was wondering the best product you would recommend to re-seal the tarmac and make it as waterproof as possible without having to re-lay new tarmac, and a product that is not slippery since it's on a slope. I was thinking the Mona-Guard, but the Tarmacoat could also be a possibility? Many thanks Petra
Answer:
This product can be appled to tarmac and provide a level of water resistance but is not a waterproofing coating.
It is unlikey to solve the issue within the cellar.
Mona-Clean Algae Remover is a specially prepared, ready to use wash. Designed for use before painting or treating with protective impregnators to kill spores of mould and algae.
Protects against re-infection for up to 3 years
For use on exterior roofs, facades, floors and landscaping
Brickwork, concrete, natural stone, render, and more...
Mona-Clean Mortar Cleaner is a specially formulated acidic cleaner designed for the effective removal of cement and mortar stains and spillages from walls and floors, especially on new build projects.
For use on concrete, stone, brickwork and render
Easy to apply, ready to use product that can also be diluted
More Information
Mona-Clean Oil Dispersant is a specially formulated, safe, ecological, water soluble oil dispersant and emulsifier for ecological removal of oil and grease from building materials.
Hydrocarbon free and non-caustic based
Suitable for use on a wide range of materials including Tarmac and asphalt, and many more examples below
More...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Petra Barneveld-Taylor on 2021-08-15 19:57:39
