Fosroc Nitoflor HB300 U is a roller applied, three-part polyurethane coating which cures to a matt surface with a mottled finish.
Resistant to a wide range of commonly used chemicals in the food, dairy and pharmaceutical industries such as concentrated citric acid (fruits), spirit vinegar (50% acetic acid), lactic acid (food & dairy products) and common alcohols (methanol & ethanol). Also resistant to a wide range of inorganic acids, fuels, hydraulic oils, mineral oils and solvents
Designed as a sealer for Fosroc Nitoflor Coving U mortar, where maximum chemical resistance is required
Resistant to a wide range of commonly used chemicals in the food, dairy and pharmaceutical industries such as concentrated citric acid (fruits), spirit vinegar (50% acetic acid), lactic acid (food & dairy products) and common alcohols (methanol & ethanol)
Also resistant to a wide range of inorganic acids, fuels, hydraulic oils, mineral oils and solvents
Thoroughly drain the contents of the hardener component into the coloured base component and mix for a minimum of 1 minute or until a homogeneous mix is obtained
Add the full contents of the aggregate bag slowly and mix for a further 1-2 minutes until a lump free consistency is obtained
Apply using a medium nap roller directly from a paint tray or scuttle
Push the coating well into the surface, make sure it is fully wetted out then pull back to a tight coat with the roller
Inconsistent application thickness will result in an uneven finish and appearance. It is always preferable to apply two thin coats rather than one heavy coat
Coverage rate 15m2 per 3 kg pack per coat (DFT per coat ~140 microns)
Regular cleaning is essential to enhance and maintain the life expectancy, slip resistance and appearance of the floor. Cured product can be easily cleaned using industry standard cleaning chemicals and techniques
Limitations
Do not proceed with application if atmospheric relative humidity is, or is anticipated to be, >90% or if the surface temperature is <3ºC above the dew point. Application should not commence when the substrate temperature or the ambient temperature is, or is anticipated to be, <5ºC during the application or within the tack-free period
The manufacture of Fosroc Nitoflor HB300 U is a batch process and despite close manufacturing tolerances, colour variation may occur between batches. Using Nitoflor HB300 U from a single batch as the final finish in one area section is recommended
Product is not colour fast and may yellow over time. The rate of change will depend on UV light and heat levels and cannot be predicted. This will be more pronounced with lighter colours and blue shades and does not compromise the product’s performance or chemical resistance characteristics
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Fosroc Nitoflor HB300 U is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Fosroc Nitoflor Coving U is a trowel applied, polyurethane coving mortar, designed for use with Nitoflor SL and other flooring systems to give a seamless finish for high hygiene sterile process, bund and tanked areas.Typical applications include food and beverage production, dairy processing, pharmaceutical, heavy duty traffic and...