- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
Two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors. Some application examples:
- Coating floors:
- The chemical and pharmaceutical industries
- The foodstuffs industry
- Laboratories
- Mechanised warehouses
- In shopping centres
- With no vapour barrier
- In underground car-parks
- For professional use only
Description
A two-component epoxy formulate in water dispersion used to create self-levelling and/or multi- layered resin coatings permeable to water vapour with an attractive, smooth or non-slip finish on industrial floors.
Quick Links - Click To Jump To Section:
Features & Benefits
- Highly versatile and is used to create protective coatings permeable to water vapour
- Suitable for use on damp substrates or on substrates with capillary rising damp
- Does not shrink, and the thickness of a dry layer is virtually the same as that of a wet layer
- Safe for the environment and so particularly suitable for the foodstuffs industry
- After application, surfaces are seamless and flat with a highly attractive finish
- Hardens even at low temperatures (around 5°C) and may be applied on concrete after only 4 days of curing
- Strong, has excellent resistance to chemicals and abrasion and may be used in both self-levelling and multi-layered coating systems
Recommendations & Limitations
- Do not dilute Mapefloor I 500 W with solvent
- Do not apply Mapefloor I 500 W on dusty, crumbling or weak surfaces
- Do not apply Mapefloor I 500 W on substrates with oil or grease stains or stains in general
- Do not mix partial quantities of the components to avoid mixing errors; the product may not harden correctly
- Do not expose the mixed product to sources of heat
- Coatings made from Mapefloor I 500 W may change colour or fade if exposed to sunlight but this has no effect on its performance characteristics
- The coating may also change colour if it comes into contact with aggressive chemicals. A change in colour, however, does not mean that it has been damaged by the chemical
- Remove aggressive chemicals as soon as possible after they come into contact with Mapefloor I 500 W
- Use suitable specific cleaning equipment and detergent to clean the product, depending on the type of dirt or stain to be removed
- Protect the product from water for at least 24 hours after application
Application & Preparation
Please refer to the data sheets in the tab above for further information.
Product Details
10017-971950
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Floors
- Application Method
- Trowel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 26KG kit (Comp A: 2KG, Comp B: 24KG)
- Coverage
- Refer to data sheet
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 8°C
- Suitable For Use On
- Floors
- Finish
- Smooth
- Application Method
- Trowel
- Manufacturer
- Mapei
- Components
- 2K
- Product Usage Type
- Self Smoothing Screed
- Product Range
- Mapefloor
- Dry for Light Traffic
- 8 hours - 48 hours
- Workability Time
- 70 mins
- Hardening
- Approx. 7 days
- Colour Family
- Clear
- Average Application Thickness
- 2-4mm
- Product Type
- Epoxy
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Mapefloor I 500 W is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT