• 702 MMA Flexible Floor Coating

702 MMA Flexible Floor Coating

RAW702

702 MMA Flexible Floor Coating is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Concrete surfaces may also be treated, following suitable preparation and priming. Ideal for use on surfaces such as parking bays, ramps, cycle paths, driveways, steps, etc.

  • Tough and abrasion resistant
  • Colour stable
  • Very good chemical resistance
  • Rapid curing minimises down time
  • Easily applied
  • Hygienic and easily cleaned
  • Cures at low temperatures (from 5°C)
  • Light foot traffic after just 2 hours at 20°C
  • Slip resistance properties may be enhanced by the incorporation of 504 Standard Anti Slip Aggregate
  • Click to jump down to Technical Data
Ordering References Weight Min. Order Quantity Shipping
Ready Mixed Colours 5KG 1 Next working day delivery, if ordered before 11am
Ready Mixed Colours 10KG 1 Next working day delivery, if ordered before 11am
RAL Classic and BS4800 Colours 5KG 10 4-5 working day lead time
RAL Classic and BS4800 Colours 10KG 5 4-5 working day lead time
BS381C, RAL Design, NCS 5KG 15 5-7 working day lead time
BS381C, RAL Design, NCS 10KG 8 5-7 working day lead time

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£68.04
VAT excluded

£81.65 Tax incl.
Quantity

Description

702 MMA Flexible Floor Coating is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Concrete surfaces may also be treated, following suitable preparation and priming.

702 MMA Flexible Floor Coating is designed to provide a dust free, seamless floor finish with protective and decorative properties and allows a fast return to service.

Slip resistance properties may be enhanced by the incorporation of 504 Standard Anti Slip Aggregate.

Recommended Uses:

  • As a tough, durable and flexible coating for Tarmac, Asphalt and Concrete type surfaces. e.g. parking bays, ramps, cycle paths, driveways, steps, etc



Quick Links - Click To Jump To Section:




Features & Benefits


  • Can be applied at temperatures as low as 5°C
  • Tough and abrasion resistant
  • Light foot traffic after just 2 hours at 20°C
  • For Tarmac and Asphalt and Concrete surfaces
  • Very good chemical resistance
  • Two-pack
  • Easily applied
  • Hygienic and easily cleaned
  • Flexible



Typical Properties


Technical Data
  702 MMA Flexible Floor Coating
Pot life @ 20°C: 15 Minutes
Pot life @ 10°C 20 minutes
Elongation at break: 250%
Adhesion to asphalt: 3N/mm² (substrate failure)
Temp. range during application: 5°C to +40°C
Temp. range during service: -30°C to + 60°C



Chemical Resistance
Chemical Resistance
Dilute Acids and Alkalis Excellent
Oil Excellent
Petrol Excellent
Diesel Excellent
Vegetable Oils Excellent
Fruit Juices Excellent



Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.



Coverage


  • A 10kg pack will be sufficient to coat an area of 10m² at a rate of 1kg/m²



Surface Preparation


  • Asphalt and Tarmac surfaces must be clean, dry and free from contaminants
  • New Asphalt and Tarmac must be allowed to ‘weather’ to ensure any excess oils are released
  • Mechanical preparation is not normally necessary, however vacuum shot blasting can be employed to clean the surface should this be required, and will provide a better mechanical ‘key’ in heavy duty environments



Priming:



Mixing:

  • 702 MMA Flexible Floor Coating is supplied as a two pack material consisting of the resin component, and the catalyst component
  • Incorporate the catalyst component under mechanical stirring and mix for 1-2 minutes



Mixing Ratio:

  • (% Catalyst by Weight) = 2



Application


  • Apply 702 MMA Flexible Floor Coating using short nap perlon or smooth lambswool rollers at a nominal rate of 0.4 – 1.0kg/m² depending on substrate profile and desired thickness
  • Should a slip resistant finish be required then broadcast 504 Standard Anti Slip Aggregate onto the first coat within 10 minutes of application
  • Following a minimum of 1 hour, sweep off excess aggregate, and apply a second coat of 702 MMA Flexible Floor Coating.



Cleaning




Curing


  • Light Foot Traffic: 2 hours @ 20°C
  • Full chemical resistance: 24 hours @ 20°C



Limitations


  • Do not apply to damp substrates

702 MMA Flexible Floor Coating will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered



Storage & Shelf Life


  • Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
  • Adequate ventilation of the storage area should be provided
  • Keep container tightly closed when not in use
  • 702 MMA Flexible Floor Coating has a minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions



Health & Safety


702 MMA Flexible Floor Coating flammable during application, so adequate safety precautions should be observed.

  • Avoid contact of the material with skin and eyes
  • Wear gloves and goggles
  • Wash off splashes immediately with soap and water
  • Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
  • Please refer to Material Safety Data Sheet for additional information
  • 702 MMA Flexible Floor Coating shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Product Details
RAW702

Data sheet

Manufacturer
Rawlins Paints
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Solvent
For Use On
Tarmac, Asphalt, Concrete
Application Method
Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
10KG
Fully Cured (at 20°C)
24 Hours
Pot Life (at 20°C)
15 minutes
Coverage
1m² per KG
Max. Application Temperature
40°C
Min. Application Temperature
5°C
Touch Dry
2 Hours
UN Number (Activator)
UN3106
UN Number (Base)
UN1866
Elongation at break
250%
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

504 Standard Anti Slip Aggregate

504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased 'anti-slip' properties in both dry and wet conditions to improve safety. Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate 0.4-0.8mm...

Price £8.51
In stock

706 MMA Floor Primer

706 MMA Floor Primer is a rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds. Ideal for use as a rapid curing primer for...

Price £85.05
In stock

707 MMA Metal Primer

707 MMA Metal Primer is a rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water...

Price £85.05
In stock

709 MMA Damp Proof Primer

709 MMA Damp Proof Primer has been developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good chemical resistance Excellent adhesion to damp concrete Impervious to water Pre-packed units ready for use Easily...

Price £85.05
In stock

109 Tool Cleaner

109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable Click to jump down to Technical Data

Price £30.62
In stock