This Sikafloor system, 2540W, is a two-component, low emission, water dispersed, coloured, epoxy resin-based coating for flooring applications.
Features and Benefits
- Low VOC/AMC emissions
- Low particle emissions
- Good chemical and mechanical resistance
- Water vapour permeable
- Water dilutable
- Easy application
- AgBB approved
**Available for delivery - see Delivery Options below**
Product customisationDon't forget to save your customization to be able to add to cart
Sikafloor 2540W is a two component, low emission, AgBB approved, water dispersed, coloured, epoxy resin based coating for flooring applications. Sikafloor 2540W has a good chemical and mechanical resistance and is easily applied.
- Concrete flooring
- Cement screeds
- Epoxy mortars
- Broadcast systems
- Normal to medium heavy mechanical and chemical loading
- Production areas
- Car park decks
For further details and application advice, please download the data sheets below.
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- For Use On
- Concrete, Cementitious Screeds
- Application Method
- Brush, Roller
- Fully Tintable
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Product Certifications
- EN 1504-2: 2004, EN 13813:2002, ISO 846
- 3.3 - 5m² per kg
- UN Number (Base)
|Ben sylvie on 2021-04-09 23:07:51|| |
Can this be used straight on top of latex self levelling compound? I have self levelled my garage floor so no looking at applying paint. Thanks
Assuming the self levelling compound is over paintable, clean, dry, sound and prepared as detailed in the Technical Data Sheet it should be primed first with Sikafloor 155 WN prior to application.
|Matthew Cutts on 2019-08-21 19:49:23|| |
Does this product need a primer
Most applications with Sikafloor 2540W simply require the first coat to be diluted with 5% water, however there are instances where a primer may be required. Details of preparation and application can be found in the product data sheets available to download from the 'Attachments' tab on the product page. If further clarification is required after referring to this information please contact our Technical Team on [email protected] or 0113 2455450 (option 2).
|Felicity on 2019-07-22 17:39:51|| |
We've taken up ancient lino in our kitchen to reveal half good quality floorboards and half concrete. It's fairly level but patchy in places. We'll sand and polyurethane the floorboards and would like to keep the concrete area but finish it in this kind of finish. We see you say it isn't suitable - what products will wee need to level the concrete and get the same type of hard wearing, matt-lustre, coloured effect please?
|Matthew on 2018-07-11 15:57:40|| |
Good afternoon, Can this product be used to paint textured stair nosings made of nickel bronze (metal)? Many thanks, Matthew
No, Sikafloor 2540W would not bond to this type of metal.
|James on 2018-03-21 08:27:30|| |
How can you achieve a matt finish with this product. We do not want a shiny gloss finish. Thanks
Sikafloor 2540W is only available as a matt finish as standard.
|PETER on 2018-01-29 11:31:48|| |
You say it is not suitable for domestic use, why is this please
We advise that Sikafloor 2540W and other products like it are only suitable for professional use and should only be applied by suitably experienced and trained contractors. Sikafloor 2540W is intended for use in production areas, warehouses, car park decks, garages, etc. and other products/systems would be better suited for use inside domestic dwelling areas such as kitchens, hallways, lounges, etc.
|victoria on 2018-01-29 09:36:55|| |
Is it possible to get some colour sample pots?
Sample pots are not available for this product, it is however produced in industry standard RAL and BS colours which are available to view with reasonable accuracy on official colour charts.
|James Oubridge on 2017-07-10 13:46:32|| |
Is the product suitable for use in domestic kitchens? and what would you recommend cleaning it with once installed? Thank
We would not recommend Sikafloor 2540W for a domestic kitchen environment. If you have a specific application please contact us with details so we can make a recommendation, or alternatively you could look at something like Rust-Oleum 9200 Rust-O-Thane which is a popular choice for this type of work and may be suitable for your application.
|Adam on 2017-03-22 20:26:28|| |
Question: Do you have a clear version? Matt/gloss
Sikafloor 2540W is low sheen finish as standard and does come in clear which is now available to order via our website.
|Keith Wright on 2016-09-01 11:31:11|| |
Question: How do I clean my tools after using sika floor -2540w rollers brushes etc
As this product is water based we would recommend Sika Thinner C or just hot soapy water straight after use.