Sikafloor 264 N
Sikafloor 264 N is a two component, solvent free, high building coating and seal coat system from the extensive Sikafloor range. An economic, coloured epoxy for concrete and cement screeds with normal-heavy wear
- Good chemical and mechanical resistance
- Easy application
- Gloss finish
- Slip resistant surface applicable
Product customisationDon't forget to save your customization to be able to add to cart
Sikafloor 264 N is a two component, solvent free, high building coating and seal coat. An economic, coloured epoxy applied by roller for concrete and cement screeds with normal up to heavy wear. It also comes in a vast array of colours to suit your aesthetic needs.
Sikafloor 264 N has been instrumental in protecting underground and multi-storey car parks for over 40 years. They boast that 80% of the car park can remain open during refurbishment, and can be found in various car park multiplexes across Brighton, in Guildford, Chelmsford and the iconic Merrion shopping centre in Leeds.
- Storage rooms
- Assembly halls
- Maintenance workshops
- Loading ramps
- Multi-storey car parks
- Wet process areas (food and beverage)
- Interior / Exterior Use
- Water / Solvent Based
- For Use On
- Concrete, Cementitious Screeds
- Fully Tintable
- Single, Two or Three Pack
- Product Certifications
- Particle Emission ISO 14644-1, Outgassing Behavior ISO 14644-8, Reaction to fire according to EN 13 501-1, Certificate of Conformity for Indirect Food Contact, Institut Fresenius, Report No. 3419034-01
- Pack Size
- 10KG, 30KG, 837KG
- 3 - 4m² per kg
- Touch Dry
- 24 Hours
- UN Number (Activator)
|Brian Stelly on 2019-04-25 21:40:14|| |
What is your MFG's warranty for 264 system?
Sika can offer up to 5 years, however there are rules and procedures to follow in order for Sika to provide a material guarantee. If of interest you would need to contact our Technical Department on 0113 2455450 (option 2) or email [email protected] with the details of your project.
|Nigel Bridger on 2019-03-29 15:28:53|| |
How soon can you apply Sika floor 264 onto a new concrete floor?
The product data sheet (available to download from the attachments tab on the product page) states < 4 % pbw moisture content. Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface.