Remmers Epoxy HB Color

REM1020

Remmers Epoxy HB Color is a pigmented roll-on coating (High Build Coat) which can be subjected to mechanical and chemical loads and is physiologically safe in the reacted state.

  • Can be subjected to mechanical loads
  • Can be subjected to chemical loads
  • Physiologically harmless once fully cured 
  • 160+ colours
  • For professional users only

**Available for delivery - see Delivery Options below**

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£171.72
VAT excluded

£206.06 Tax incl.
Quantity

Description

Remmers Epoxy HB Color is a pigmented roll-on coating (High Build Coat) which can be subjected to mechanical and chemical loads and is physiologically safe in the reacted state.

Surface Preparation

Prepare the substrate by suitable means, e.g. steel ball jetting or diamond grinding, so that it meets the requirements specified above. Broken out or missing areas in the substrate should be filled flush with the surface using Remmers PCC systems or Remmers EP mortars.

Mixing Instructions

  • Add the entire quantity of the hardener (component B) to the base compound (component A).
  • Mix thoroughly with a slow-speed electric mixer
    (approx. 300 - 400 rpm).
  • Pour the mixture into a separate container and mix again thoroughly.
  • Mix for at least 3 minutes.
  • Insufficient mixing is indicated by streaks forming.
  • As soon as the mixture is ready to use, apply it in full to the prepared surface and spread it using suitable tools.

Conditions For Use

  • Temperature of material, surroundings and substrate: min. +10°C - max. +30°C.
  • Once the material has been laid, it should be protected against any direct exposure to water and moisture for at least 24 hours.
  • Relative humidity should not exceed 80%.
  • The temperature of the substrate must be at least 3°C above the dew point temperature during application and curing.

Working time (+20°C)

Approx. 25 minutes

Waiting time (+20°C)

Waiting times between the application of each coat: min. 16 hours and max. 48 hours. If conditions on site require longer waiting times, the surface must be slightly sanded (until it turns white) before the following application.

Drying time (+20°C)

Foot traffic after 16 hours, mechanical loads after 3 days and full loading capacity after 7 days.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Product Details
REM1020

Data sheet

Water / Solvent Based
Solvent
Application Method
Roller, Squeegee
Sheen
Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
10KG, 25KG
Mixing Ratio
81.1 : 18.9 parts by weight
Touch Dry (at 20°C)
16hrs
Pot Life (at 20°C)
25mins
Coverage
0.3kg per m²
Recommended Thinner/Cleaner
Remmers V101 Thinner
Max. Application Temperature
30 °C
Min. Application Temperature
5 °C
Density
1.54 g/cm³
Shelf Life (from date of manufacture)
12 months
UN Number (Activator)
UN2735
UN Number (Base)
UN3082
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send