Britannia High Build Epoxy Floor Coating


Britannia High Build Epoxy Floor Coating (Formerly Britannia Heavy Duty Epoxy Gloss Floor Coating) is a two-pack, solvent-free, high build floor coating for use on industrial and commercial floors. It is extremely hard wearing, eco friendly and comes in a choice of colours.

  • Provides an easy to clean, dust free surface
  • Self levelling - High build 100% solids
  • Withstands forklift traffic
  • Good chemical resistance
  • For use on new and existing concrete
  • Please note: Dark Grey colour now discontinued

£65.40(ex. VAT)
£78.48 (inc. VAT)
Please choose your colour
Available for Delivery (See Delivery Options Below)


Britannia High Build Epoxy Floor Coating (Formerly Britannia Heavy Duty Epoxy Gloss Floor Coating) is an extremely hard wearing gloss coating providing easy to clean, dust free surfaces that withstands extremely heave traffic including forklift trucks.

For use on new and existing interior concrete floors in labratories, showrooms, schools and plant rooms.

Britannia High Build Epoxy Floor Coating is self-levelling, solvent free and eco-friendly.

Quick Links - Click To Jump To Section:

Features & Benefits

  • Easy to clean
  • Heavy duty system
  • Self levelling
  • Withstands forklift traffic
  • Gloss Finish
  • Eco Friendly
  • Two-pack
  • Good chemical resistance
  • Slip resistant options
  • For use on new and existing concrete

Spreading Rate

These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • 5kg Composite Pack covers 16.6-20m2 per coat (0.25-0.3kg/m2 per coat) achieving a dft of 200-240 microns per coat
  • Apply 2 Coats which will give an overall dft of approx 400-480 microns

Drying Times

  • Minimum surface application temperature must be above 5°C
  • Recommended over coating after 12-18 hours
  • Light Traffic after 24 hours 20°C
  • Forklifts/Heavy Traffic after 3 days 20°C
  • Avoid washing surface until a full cure has been completed after 7 days


New Concrete Floors:

  • New Concrete must be at least 4 weeks old before considering coating the substrate or moisture less than 5%
  • The surface must be clean, sound, dry and fully cured and surface latience removed preferably by (depending on the degree of contamination) acid etching, light mechanical scrabbling, blasting, grinding or degreasing

Existing Concrete Floors:

  • Remove all dirt, oil, grease or other surface contaminants by enclosed shot blasting, scarification or mechanical grinding
  • Fats, oils or greases must be removed by mechanical means and detergent washing


  • Add the smaller tin containing PART B - CURING AGENT to the bigger tin containing PART A - EPOXY RESIN. Ensure mixing of the combined materials is done thoroughly using a spatula, wide bladed tool and or drill assisted paint mixing tool (on its lowest speed setting)
  • Always ensure a spatula is used to mix any unmixed materials from the sides or the bottom of the tin
  • It is suggested that continuous mixing is maintained for at least 3 minutes until an even colour and uniform consistency is achieved. Over mixing must be avoided to reduce air entrainment
  • Do not mix more than one pack at a time

Pot Life:

  • Up to 45 minutes at 20°C. Greater temperatures will reduce pot life


  • Britannia Epoxy Floor Primer (see separate Britannia Epoxy Primer data sheet) must be used on highly polished/Power floated Floors
  • Open, porous substrates will require priming
  • Use Britannia Damp Tolerant Primer (see separate Britannia Damp Tolerant Primer data sheet) for any environment with damp conditions


  • Stir well before use
  • Please follow the coverage rates shown in Spreading Rate Section
  • Store between 15°C - 25°C for at least 8 hours before use
  • The ambient temperatures of the areas should not be allowed to fall below 10°C throughout the application and curing period
  • Surface temperatures must be above 5°C, in cases where the temperature is higher than 30°C, the surface should be dampened with water
  • Apply the first coat by brush, squeegee or short-medium pile solvent resistant roller ensuring the product is well worked into the surface
  • Do not use a water-based roller
  • Do not exceed the coverage rates stated above
  • Do not over roll
  • Floor areas should be cross-rolled to ensure even application and to minimise roller marks
  • Second coat can be applied after 12-18 hours and should be completed within 5 days of initial coat, if left for longer than 5 days, the surface should be abraded pre second coat


  • Before the product cures all applicators should be washed in warm soapy water. Any spillages of the PART A - EPOXY RESIN prior to mixing must be removed by solvents

Shelf Life & Storage

  • Do not allow packs to freeze
  • 12 months shelf life from date of production in original unopened containers and can be stored in dry conditions between 5°C - 30°C


  • See Safety Data Sheets
  • Wear gloves, goggles and suitable protective clothes
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
  • Keep out of reach of children
  • Do not use near fishponds
  • Toxic to aquatic organisms. May cause long term adverse effects in the aquatic environments
  • Do not empty into drains

Product Details

Data sheet

Interior / Exterior Use
For Use On
Clear, Standard / Ready Mixed
Single, Two or Three Pack
Pack Size
5Kg Composite Pack covers 16.6-20m2 per coat(0.25-0.3kg/m2 per coat) achieving a dft of 200-240microns per coat. Apply 2 Coats which will give an overall dft of approx. 400-480 microns.
Touch Dry
Touch dry after 4 hours at 20°C. Through dry after 8 hours at 20°C. Recommended over coating after 12-18 hours.
UN Number (Activator)
UN Number (Base)
Base Type
Solvent Free
Colour Family
Colour Family

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields


Britannia High Build Epoxy Floor Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT