PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.22 (incl. VAT)
£35.18 (ex. VAT)
In Stock and Available for Delivery
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend PPG SigmaCover 2 as a great alternative.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Use PPG Nu-Klad Basic is a two-component, solvent-borne epoxy floor coating for industrial floors with light, occasional traffic, where fast-drying and a quick return to service is desired.
Nu-Klad Basic can be overcoated with a polyurethane topcoat for aesthetic durability. The coating dries quickly and can be walked on 6 hours after application.
Thinning the product allows it to be used as a primer for application directly on concrete.
Top Features & Benefits
- Fast return to service - dry to walk on in just 6 hours
- Good abrasion resistance
- Can be overcoated with a polyurethane topcoat for aesthetic durability
- Suitable for use with PPG Anti Skid Powder
- A thinned version can be used as a primer for application directly on concrete
- Overcoating interval minimum of 6 hours
- 3 hours pot life (at 20°C (68°F))
- Semi-gloss finish
Refer to tables below for information regarding spreading rate and film thickness, overcoating intervals and curing times
Product Data
Basic data at 20°C (68°F)
| Data for Mixed Product | |
|---|---|
| Mass density | 1.4 kg/l (11.7 lb/US gal) |
| Volume solids | 72 ± 2% |
| VOC (Supplied) | Directive 1999/13/EC, SED: max. 263.0 g/kg |
| max. 361.0 g/l (approx. 3.0 lb/US gal) | |
| Recommended dry film thickness | 50 - 150 µm (2.0 - 6.0 mils) |
| Theoretical spreading rate | 5.8 m²/l for 125 µm (231 ft²/US gal for 5.0 mils) |
| Overcoating Interval | Minimum: 6 hours |
| Maximum: 21 days | |
| Dry to walk on | 6 hours |
| Full Cure | After 7 days |
Notes:
- Refer to tables below for information regarding spreading rate and film thickness, overcoating intervals and curing times
Preparation & Application
Recommended Substrate Conditions & Temperatures
Substrate conditions of concrete for thinned version
- Dried for at least 28 days in good ventilation conditions
- Moisture content should not exceed 4.5%
- Concrete must be sound, dry, free from laitance and any contamination
- Rough surface; eventually abraded by power tool or diamond abrading tool
Coated Concrete
- Existing sound coating systems; sufficiently roughened, dry and cleaned
- To ensure compatibility, rub the existing coating with a cloth with Xylene or MEK for 10 seconds, and remove existing coatings if dissolving occurs
- Rough surface; eventually abraded by power tool or diamond abrading tool
Substrate Temperature & Application Conditions
- Ambient temperature during application and curing should be between 10°C (50°F) and 30°C (86°F)
- Relative humidity during application and curing should not exceed 85%
- Substrate temperature during application and curing should be between 10°C (50°F) and 30°C (86°F)
- Substrate temperature during application should be at least 5°C (7°F) above dew point
System Specification
Standard system
- NU-KLAD BASIC: 1 x 125 µm (5.0 mils) on top of primed concrete
Openly sprinkled anti-skid system
- NU-KLAD BASIC: 1 x 125 µm (5.0 mils) on top of primed concrete
- PPG Anti Skid Powder openly or fully sprinkled
Note: In case of fully sprinkled an extra layer of 50 µm (2.0 mils) NU-KLAD BASIC, SIGMADUR 520 or SIGMADUR 550 can be applied for a better aesthetical appearance
Instructions For Use
Mixing ratio by volume: base to hardener 80:20
Mixing ratio by weight: base to hardener 86.2:13.8
- Material temperature should be between 10°C (50°F) and 30°C (86°F)
- Mix base and hardener with a mechanical mixer thoroughly until homogeneous
- The thinner should be added after mixing the two components
Application
Anti-skid system
- Apply NU-KLAD BASIC: 1 x 125 µm (5.0 mils) on top of primed concrete
- Sprinkle PPG Anti Skid Powder in the wet layer (open or full)
Openly sprinkled anti-skid system
- Roll again with the wet roller immediately after sprinkling
Fully sprinkled anti-skid system
- Remove excess of PPG Anti Skid Powder after drying
- An extra layer of 50 µm NU-KLAD BASIC, SIGMADUR 520 or SIGMADUR 550 can be applied for a better aesthetical appearance
Airless spray
Recommended Thinner
Volume of thinner
- 10 - 15% when applied as a primer direct to concrete; 0 - 5% when applied on primed concrete
Brush
Recommended Thinner
- THINNER 91-92
Volume of thinner
- 10 - 15% when applied as a primer direct to concrete; 0 - 5% when applied on primed concrete
Cleaning solvent
Additional Data
| Spreading rate and film thickness | |
|---|---|
| DFT | Theoretical spreading rate |
| 75 µm (3.0 mils) | 9.6 m²/l (385 ft²/US gal) |
| 125 µm (5.0 mils) | 5.8 m²/l (231 ft²/US gal) |
| Overcoating interval for DFT up to 125 µm (5.0 mils) | |||||
|---|---|---|---|---|---|
| Overcoating with... | Interval | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) | |
| Itself | Minimum | 9 hours | 6 hours | 4 hours | |
| Maximum | 1 month | 21 days | 14 days | ||
| Polyurethane Topcoat | Minimum | 30 hours | 18 hours | 10 hours | |
| Maximum | 21 days | 14 days | 7 days | ||
Notes:
- Surface should be dry and free from any contamination
- For intervals exceeding the maximum overcoating interval, the surface has to be roughened sufficiently before overcoating
| Curing time for DFT up to 125 µm (5.0 mils) | |||
|---|---|---|---|
| Substrate temperature | Dry to walk on | Light impact/abrasion | Full cure |
| 10°C (50°F) | 9 hours | 16 hours | 12 days |
| 20°C (68°F) | 6 hours | 12 hours | 7 days |
| 30°C (86°F) | 4 hours | 8 hours | 4 days |
Note: Adequate ventilation must be maintained during application and curing.
| Pot life (at application viscosity) | |
|---|---|
| Mixed product temperature | Pot life |
| 10°C (50°F) | 5 hours |
| 20°C (68°F) | 3 hours |
| 30°C (86°F) | 2 hours |
Safety Precautions
Since improper use and handling can be hazardous to health and cause of fire or explosion, safety precautions included with Product Data/Application Instruction and Material Safety Data Sheet must be observed during all storage, handling, use and drying periods
Product Details
373034
Data sheet
- Interior / Exterior Use
- Interior
- Sheen
- Semi-Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4L, 20L
- Parts
- Two
- Base Type
- Epoxy
- Mixing Ratio
- 4:1
- Key Features
- Good abrasion resistance, suitable for use with anti-skid, a thinned version can be used as a primer for application directly on concrete
- Touch Dry (at 20°C)
- 6 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 6 hours
- Fully Cured (at 20°C)
- After 7 days
- Pot Life (at 20°C)
- 3 hours
- Coverage
- 5.8 m²/l for 125 µm (231 ft²/US gal for 5.0 mils)
- Recommended Thinner/Cleaner
- PPG Thinner 90-53, PPG Thinner 91-92
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- Itself, polyurethane topcoat
- Max. Application Temperature
- 30°C (86°F)
- Min. Application Temperature
- 10°C (50°F)
- Density
- 1.4 kg/l (11.7 lb/US gal)
- Solids by Volume
- 72 ± 2%
- Heat Resistance (up-to)
- -
- VOC
- Directive 1999/13/EC, SED: max. 263.0 g/kg. max. 361.0 g/l (approx. 3.0 lb/US gal)
- Shelf Life (Once Opened)
- Base: at least 12 months when stored cool nd dry, Hardener: at least 24 months when stored cool and dry
- UN Number (Activator)
- -
- UN Number (Base)
- UN1263
- Brand
- PPG
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG Nu-Klad Basic is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
PPG Thinner 91-92
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£44.10 (incl. VAT)
£36.75 (ex. VAT)
In Stock and Available for Delivery
PPG Anti Skid Powder
PPG Anti Skid Powder, a fine aggregate for use with primarily with Nu-Klad Aqua or Nu-Klad Basic Floor Coatings to help improve grip.More Information Delivery Info
£76.34 (incl. VAT)
£63.61 (ex. VAT)
In Stock and Available for Delivery