Coo-Var Profloor Plus
Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abrasion and chemical resistance. Coo-Var Profloor Plus has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem.
Ideal uses :
- Stadiums and other high wear public places
- Anti-slip option available
Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abraision and chemical resistance. Coo-Var Profloor Plus has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem. Ideal for use in factories, workshops/garages, stadiums and other high wear public places. An anti-slip option is available.
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
You should have two containers: one larger than the other and labelled Hardener. The other smaller one labelled Base. The contents of the pack marked Base are added to the contents of the larger pack marked Hardener and thoroughly mixed together. Use a slow speed electric mixer to ensure the items are fully mixed together as poorly mixed product can lead to uncured areas and gel spots. This will make up one 5 kilo unit of Profloor Plus Floorpaint.
As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 10°C during application or during the drying process. In confined spaces, provide adequate ventilation during application and drying.
Apply direct to ordinary stable concrete. Coo-Var High Performance Primer should be used where the surface is smooth, polished or porous. On Metal use Teamac 2 Pack Zinc Phosphate Primer. Can be used on wood asphalt and tarmac. CooVar Dampshield and Coo-Var Oil Tolerant Primers are also available. See relevant Technical Data
Coo-Var Profloor Plus Floor Paint.
Please Note: Coo-Var Profloor Plus requires professional and careful application. Special colours can be produced, but may be subject to a surcharge and extended lead times - Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- See Safety Data Sheet
- Brush, Roller
- Pot Life (at 20°C)
- 20-30 minutes
- 3.4 - 4m² per kg
- Solids by Volume
- Touch Dry
- 4 - 8 Hours
- UN Number
|Chris Anderson on 2017-05-15 12:02:07|| |
Question: I have recently painted my factory floor with coo-var profloor plus. The paint is subject to heavy traffic including fork lift trucks driving on it. So far the paint is holding up well but has only been down for a week and is very dirty including marks from the fork lift truck tyres. What is the best method of cleaning the paint? I am looking for something which is effective but non-damaging to the paint. Thanks Thanks
Rust-Oleum Floor Cleaner should meet your requirements.