702 MMA Flexible Floor Coating is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Concrete surfaces may also be treated, following suitable preparation and priming. Ideal for use on surfaces such as parking bays, ramps, cycle paths, driveways, steps, etc.
Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
Readily available standard colours also available here
702 MMA Flexible Floor Coating is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Concrete surfaces may also be treated, following suitable preparation and priming.
702 MMA Flexible Floor Coating is designed to provide a dust free, seamless floor finish with protective and decorative properties and allows a fast return to service.
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
A 10kg pack will be sufficient to coat an area of 10m² at a rate of 1kg/m²
Surface Preparation
Asphalt and Tarmac surfaces must be clean, dry and free from contaminants
New Asphalt and Tarmac must be allowed to ‘weather’ to ensure any excess oils are released
Mechanical preparation is not normally necessary, however vacuum shot blasting can be employed to clean the surface should this be required, and will provide a better mechanical ‘key’ in heavy duty environments
Priming:
No primer required for Asphalt and Tarmac surfaces
702 MMA Flexible Floor Coating is supplied as a two pack material consisting of the resin component, and the catalyst component
Incorporate the catalyst component under mechanical stirring and mix for 1-2 minutes
Mixing Ratio:
(% Catalyst by Weight) = 2
Application
Apply 702 MMA Flexible Floor Coating using short nap perlon or smooth lambswool rollers at a nominal rate of 0.4 – 1.0kg/m² depending on substrate profile and desired thickness
Should a slip resistant finish be required then broadcast 504 Standard Anti Slip Aggregate onto the first coat within 10 minutes of application
Following a minimum of 1 hour, sweep off excess aggregate, and apply a second coat of 702 MMA Flexible Floor Coating.
702 MMA Flexible Floor Coating will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered
Storage & Shelf Life
Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
Adequate ventilation of the storage area should be provided
Keep container tightly closed when not in use
702 MMA Flexible Floor Coating has a minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
702 MMA Flexible Floor Coating flammable during application, so adequate safety precautions should be observed.
Avoid contact of the material with skin and eyes
Wear gloves and goggles
Wash off splashes immediately with soap and water
Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
702 MMA Flexible Floor Coating shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
702 MMA Flexible Floor Coating - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety.
Produces a rough, non-skid surface
Hard wearing and chemical resistant
Coloured Quartz Aggregate 0.4-0.8mm...
706 MMA Floor Primer is a rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.
Ideal for use as a rapid curing primer for...
707 MMA Metal Primer is a rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.
Rapid cure, even at low temperatures - from as low as -30°C*
Very good corrosion resistance
Excellent adhesion
Impervious to water...
709 MMA Damp Proof Primer has been developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds.
Rapid cure, even at low temperatures - from as low as -30°C*
Very good chemical resistance
Excellent adhesion to damp concrete
Impervious to water
Pre-packed units ready for use
Easily...
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.
Low Hazard
Low evaporation rate
Excellent solvency powers
80% biodegradable
This product is for Professional Use Only
Images are for illustrative purposes only and may differ from the actual product
More...