Please Note: Ready Mixed RAL 6010 Grass Green is available upon request subject to a 14-21 Working Day lead time - please contact our sales team on0113 2455450 to place an order
Product customisation
Don't forget to save your customization to be able to add to cart
The Nitodek Topcoat resin must be stirred with a drill and paddle to ensure any settlement has been properly re-dispersed.
Nitodek FS Topcoat resin and hardener should be mixed according to the ratio given in Table 1 in the data sheet. Depending on the skill and experience of the applicator different application tools can be used eg. Mohair roller, comb trowel or smooth trowel. Apply as a single coat.
Nitodek FS Topcoat must be allowed to cure properly before returning the area to service.
Fosroc Nitodek FS System
The Nitodek FS System is a high performance, multi-layer, trafficable, waterproofing system that provides a seamless, highly resistant, elastomeric, anti-slip finish.
Typically polyurethane technology has been used to provide durability and flexibility, however the slow speed of curing in UK climates can be restrictive in projects requiring fast turnaround.
Fosroc’s Nitodek FS system is a hybrid system that combines MMA Technology with polyurethanes, the benefits being that the product is fast curing (at approximately 60 minutes per layer) as well as hard wearing and flexible.
Bespoke Nitodek FS systems can be produced from the suite of system products to suit specific situations and performance requirements; from balconies and walkways, to roof decks, podium decks, car park decks, factory floors and airport hangars.
Nitodek FS forms part of Fosroc’s comprehensive repair and protection offer.
Nitodek FS offers the following advantages:
Extremely short curing times
Outstanding impact resistance
Speed of application
Crack bridging
Easy to apply even at low temperatures down to 0oC
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Fosroc Nitodek FS Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Fosroc Polyurea WCS is a cartridge-packed, 100% solids, flexible, two-component, rapid curing Polyurea system. Designed for use as a fast setting elastomeric waterproof coating and seam seal.Standard Grade is low pressure spray or pour-applied, designed as a waterproofing and protective coating for small areas including repair work. It...
Fosroc Nitodek FS Fleece is a high performance polyester fabric with high strength and good stretch characteristics - used as part of the Nitodek FS system a hybrid fast curing trafficable waterproofing system that combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible suitable...
Nitodek FS Membrane Resin is pigmented to a beige colour to allow the applicator to ensure no gaps are left in coverage. The product cures to a permanently flexible finish which is highly tolerant of thermal movement in concrete.Part of the Nitodek FS system Applied over Nitodek FS PrimerMore Information Delivery Info
Nitodek FS Primer is a transparent, solvent-free, 2-component methacrylic resin that cures rapidly, even at low temperatures, on steel and new and existing concrete surfaces.Part of the Nitodek FS system Fast setting allows for quick over-coating Easy to apply Suitable for priming vertical and absorbent substrates Seamless Solvent...
Fosroc Nitodek FS Wearcoat is a three component product comprising resin, filler and hardener. It cures rapidly to give high impact resistance and low-temperature flexibility. Combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible suitable for balconies, car park decks, ramps and...