• RSL Elladur™ SF
    • RSL Elladur™ SF
    • RSL Elladur™ SF

    RSL Elladur SF - Special Colours

    ELLAB
    RSL8312

    Elladur SF is a high-build, Polyaspartic/Polyurea fast-cure floor coating system designed to create an advanced, tough and durable gloss finish in a range of thicknesses.

    • Fast cure at low temperatures
    • Tough, yet flexible
    • Low odour
    • UV stable
    • High build
    • Can be used commercially/industrially
    • Can be used on a range of substrates
    • Refer to Ordering References below
    • Note - All colours have minimum order quantities of 68 units and 7 day lead times - orders over 1000L may have lead times of 14 days+, please contact our sales team to discuss your requirements on 0113 2455450 or send a message to [email protected]
    • Standard colours - with faster delivery options and no minimum quantities - are available at RSL Elladur SF - Standard Readily Available Colours

    Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

    Should you require training, visit - https://www.safeusediisocyanates.eu/

    Colour
    Pick a Colour
    • Current colour: Clear
    Close colour picker
    • Clear
    • White
    • Black
    • Poppy Red
    • Salsa Red
    • Flint Grey
    • Savannah Yellow
    • Kingfisher Blue
    • Forest Green
    Size
    Finish
    £213.49(ex. VAT)
    £256.18 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    The minimum purchase order quantity for the product is 65.

    Description

    Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

    Should you require training, visit - https://www.safeusediisocyanates.eu/

    Ordering References


    ColourNearest RAL MatchSizeFinishMimimum Order Quantity
    Clear-5 KGGloss65
    BlackRAL 90175 KGGloss68
    Salsa RedRAL 30115 KGGloss68
    SavannahRAL 10325 KGGloss68
    Forest GreenRAL 60025 KGGloss68
    Kingfisher BlueRAL 50175 KGGloss68
    Poppy RedRAL 30205 KGGloss68

    Some colours with minimum order quantities may also have longer leads times due to being made to order

    The game-changing, technological Elladur SF and SF Clear are very versatile systems. They can be created with anti-slip finishes and decorative finishes by incorporating the relevant flakes and aggregates to your flooring needs.

    Recommended Uses

    • Where a fast turnaround at a low temperature is required
    • Decorative floors
    • Domestic floors
    • Medical areas
    • Commercial environments
    • Industrial floors
    • Where high-build, UV stable coatings are needed

    Preparation

    New Concrete Floors: New concrete must be clean, sound, dry and fully cured and surface laitance removed preferably by vacuum enclosed shot blasting or mechanical grinding. A minimum strength of 25N/mm sq. is required.

    Timber Floors: Must be clean, sound and dry. Old clear varnish/topcoat must be removed/sanded and surface must be primed prior to application.

    Existing Concrete Floors: Remove all dirt, oil, grease old paints or other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing. Local repairs should be carried out using Resuscreed PA or Resuflor Screed.

    Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation, as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advise on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.

    Where over-coating other systems such as epoxy coatings or screeds, as part of a specified composite system in the data sheets, please follow the recoat time as stated. These should be tack free, but not fully cured. If fully cured, then mechanical preparation is required to ensure intercoat adhesion.

    Where Elladur SF is applied to masonry/concrete surfaces, care must be taken to ensure that surface preparation is thorough but does not disfigure the surface.

    Priming

    Elladur SF may be applied to an existing resin floor system, where a primer is not required. When applied direct to porous substrates such as concrete, the surface must be primed with Elladur SF to ensure good adhesion to the surface.

    Where the relative humidity of the substrate exceeds 75%, Resuprime MVT should be specified and selected on the basis of hygrometer readings in accordance with BS 8203.

    The number of coats to be applied is chosen in accordance with the following table:

     ERH% Required Coating Thickness
    75-85 1coat of Resuprime MVT at 200 microns per coat
     85-92 2coats of Resuprime MVT at 200 microns per coat
    92-97 3coats of Resuprime MVT at 200 microns per coat

    Application

    Mixing: Pre-mix the base component to a uniform consistency, then add the entire contents of the hardener to the base and mix by using a slow speed electric mixer for approximately two minutes to achieve consistent mixture. Do not use a separate mixing bucket as it may affect the mixing ratio.

    A rubber blade and/or a short-haired roller can work best for this application, to help avoid incorporating extra air and moisture in the coating. It is important to ensure that the recoat times are observed, with a maximum recoat of 8 hrs measured at 20°C substrate temperature and 50% relative humidity.

    For other conditions please consult with our technical team. It is strongly recommended to apply the second coat as soon as the first coat has lost the tackiness to achieve the maximum adhesion. If the maximum recoating interval is exceeded, then the surface must be prepared and roughened to ensure intercoat adhesion.

    Product Details
    8312-919117

    Data sheet

    Manufacturer
    RSL
    For Use By
    Industrial Use
    Interior / Exterior Use
    Interior Use
    For Use On
    Concrete, Wood
    Sheen
    Gloss
    Colour
    Clear, Standard / Ready Mixed
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    5KG
    Coverage
    5kg will cover between 6 to 20m2 depending on the applied thickness
    Min. Application Temperature
    2°C
    Touch Dry
    2-3 Hours
    Base Type
    Solvent-Free
    Suitable For Use On
    Concrete Floors
    Suitable For Use On
    Wooden Floors
    Components
    2K
    Usages
    Low Temperature
    Product Usage Type
    Topcoat
    Product Range
    Elladur
    Colour Family
    White
    Colour Family
    Grey
    Colour Family
    Blue
    Colour Family
    Yellow
    Colour Family
    Clear
    Colour Family
    Green
    Colour Family
    Red
    Colour Family
    Black
    Categorised As
    Floor Paints > Low Temperature Floor Paints
    Seasonal
    Cold Weather
    Product Type
    Polyaspartic
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    RSL Elladur SF - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    RSL Resuflor Screed

    Resuflor Screed (formerly known as Resuscreed 45) is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish.Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be...

    Price £72.70 (ex. VAT)
    In Stock and Available for Delivery

    RSL Resuprime MVT

    RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on...

    Price £147.10 (ex. VAT)
    In Stock and Available for Delivery

    RSL Resuflor Patch

    RSL Resuflor Patch (Formerly known as Resuscreed PA and Resupatch) is a three-pack epoxy resin mortar designed for rapid concrete repair in heavy duty environments.Excellent mechanical properties Can be feather edged Abrasion and impact resistant Dust-free Concrete like in appearance Easy to apply Minimum surface preparation...

    Price £42.48 (ex. VAT)
    In Stock and Available for Delivery