Coo-Var Shellac Prime-All is a heavy duty, shellac based coating designed to block out difficult stains and odours. Ideal for sealing tar, bitumen and creosoted surfaces and to prevent bleeding through in subsequently applied solvent based paints. It exhibits heavy stain blocking from nicotine, pen, oils and water stains and has rapid drying...
Rust-Oleum 8399 Hygienic Primer
A specially formulated hygienic primer for use with Rust-Oleum 8300 Hygienic Topcoat. As a system it protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. Ideal for walls and ceilings.
Rust-Oleum 8399 Hygienic Primer is a solvent based, single pack hygienic primer which once overcoated with Rust-Oleum 8300 Hygienic Topcoat protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. Taken from the Rust-Oleum range available at Rawlins Paints, ideal for walls and ceilings.
Features & Benefits
- Very fast drying and recoatable with Rust-Oleum 8300 Hygienic Topcoat
- Use on previously painted or porous mineral substrates like concrete, brick and plastered walls, masonry and mineral fibre board
- Can be applied as low as 0°C ; ideal for refridgerated areas
- Non-yellowing and resistant to frequent cleaning
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 12m² per litre
- Touch Dry
- 1 hour
Be the first to ask a question about this product!
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
SikaProof P-12 is a fully and permanently bonded, self-adhesive, post-applied, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of a flexible polyolefin (FPO) based membrane that is pre-coated with an adhesive sealant layer so that the membrane system is self-adhesive. It is cold- and post-applied, without heat...
The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls. Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster. Easy to cut, fix and seal, unique undercut stud design creates mechanical key for...
Sika Reemat Lite is a glass fibre reinforcement mat for use primarliy in conjunction with the Sikagard Hygiene range of systems for walls and ceilings to provide increased system strength, crack bridging and longevity. Refer to the relevant Sika system/product data sheets for specfic details on application, consumption, etc.
Coo-Var Profloor Plus FH is a fast curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to allow the laying and recoating of a surface within the same working day. It is particularly valuable where rapid return to service is required, or where the economics of a contract require that two coats...
SikaProof A05, SikaProof A08 and SikaProof A12 are fully and permanently bonded, self-adhesive, composite sheet membrane waterproofing systems for reinforced concrete of the main structure. It consists of an embossed polyolefin (FPO) membrane laminated with a sealant grid and a non-woven fleece. Damp-proofing, concrete protection and waterproofing for...
Ideal for walls and woodwork where hygiene control is essential in low wear areas. Offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment.
303 Epoxy Floor Paint is a high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application. Available in standard and winter grade versions.
A 2 pack, solvent free, hygienic floor coating from Rust-Oleum for areas where controlled hygienic conditions are of essential importance and where high durability and abrasion resistance is needed.
Sikagard 403 W is a single component, waterborne modified acrylic resin based intermediate and surface coating, containing an antimicrobial additive. Seamless, easy to clean finish, tough and highly durable, good water vapour permeability, more flexible in comparison to standard acrylic paints, improves resistance to cracking and flaking, ultra-low...
Zanders PF59 Stain Blocking Primer Finish is a high quality primer finish in a durable matt finish for all interior and exterior wood, plaster and masonry. Based on advanced acrylic technology Zanders PF59 Stain Blocking Primer Finish also inhibits stains bleeding through the substrate.
A water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat protects walls and ceilings against normal humidity and contamination indoors.
Coo-Var Profloor Plus Cold Cure is a low temperature curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to cure when the surface temperature is in the range 0 to 10°C. Coo-Var Profloor Plus Cold Cure is particularly valuable for applications at colder times of the year when the cure time of the...
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray.