Rust-Oleum Biosan Ultra

    We no longer stock this product, but can recommend Watco Epoxy Gloss Coat Hygienic or Watco Epoxy Matt Coat Hygienic as a great alternative.

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    We no longer stock this product, but can recommend Coo-Var Guard-Coat as a great alternative.

    Rust-Oleum Biosan Ultra a 2 pack hygienic floor coating for floors in areas where hygiene control is essential and where high abrasion resistance is needed. Rust-Oleum Biosan Ultra is dries very hard, has exceptional abrasion resistance and is also resistant to oils and solvents. The solvent free, almost odourless formula makes it easy and safe to use and clean while helping maintain a hygienic environment.

    Features & Benefits

    • High abrasion resistance
    • Solvent free, low odour
    • Chemical resistant and easy to clean
    • Excellent opacity
    • Resistant to oils and solvents
    • Semi gloss, available in 5 standard colours

    A healthy concept...

    Significant extra hygienic protection is guaranteed with Biosan® Hygiene Coatings for walls, ceilings and floors. Biosan® contains the unique antibacterial agent BACTRON ™, which surrounds and partly penetrates the resin and pigments;

    The active ingredient of BACTRON™ has been scientifically proven to kill most types of bacteria, including ‘super bugs’, by a variety of different mechanisms.

    Unlike some other biocides and antimicrobial additives BACTRON™ is not classified as harmful to humans. The active ingredient has food contact approval in the USA and EU.

    Biosan® with BACTRON™, supported by good housekeeping practices, is the ideal solution for the maintenance of a hygienic environment in areas where cleanliness is of utmost importance, e.g. hospitals, food processing plants, kitchens, dairies, breweries, abattoirs, leisure centres and schools.

    Where surfaces are subjected to severe wear or vigorous cleaning, the antibacterial properties of Biosan® are constantly replenished, providing on-going protection against the harmful effects of bacteria throughout the normal service life of the coating.

    Biosan® products are formulated using unique modern water based technology. When used in accordance with instructions, Biosan® is entirely safe. All Biosan® products are classified as non-flammable. Most Biosan® products are rated Class 0 surface spread of flame based on BS 476: Part 6 & 7.

    Bactericidal action can be quantified and shown graphically. The image on the left of two Petri dishes compares the ‘kill’ rate of Biosan® containing BACTRON™ (blue) with a control (red) when challenged with Staphylococcus aurous. It uses a logarithmic scale to show that Biosan® with BACTRON™ kills 99% of bacteria during the initial 48 hours. After 7 days the bacteria cannot be detected on the BACTRON™ protected sample whereas significant numbers of potentially pathogenic (disease causing) bacteria are still surviving on the unprotected coating.

    The unique antimicrobial action of Biosan® has been independently tested and verified by a DEFRA approved laboratory!

    Technical Data

    • Density: 1,45
    • Gloss Level: Satin
    • Solids content in volume: 50 %
    • Solids Content in weight: 65 %
    • Mixing Ratio: Base : Activator = 4.1 : 0.9 (Volume)

    Drying Times At 20°C/RH 50%

    • Touch dry: 3 hours
    • Dry to handle: 8 hours
    • Dry to recoat: 24 hours
    • Fully cured: 7 days
    • Pot Life: 2 hours

    Theoretical Consumption

    1st coat: 5 - 7 m²/l. 2nd coat: 4 - 5 m²/l.

    Practical Consumption

    Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

    Remarks

    In order to become a solid gloss finish, please respect the consumption quantities of the second layer, this means that a can of 5 l has to be applied on a surface of 20 – 25 m². Always provide good air ventilation, so even when it rains, windows and doors have to be opened wherever possible. The 2 components must be mixed under mechanical agitation. The use of Biosan products does not exclude the necessity to clean and disinfect on a normal and regular basis. At lower temperatures (8 - 10°C), this product can only be recoated after ± 48 hours.

    Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

    Product Details

    Data sheet

    Application
    Brush, Roller, Spray
    Dry to Handle (at 20°C)
    8 Hours
    Dry to Recoat (at 20°C)
    24 Hours
    Fully Cured (at 20°C)
    7 Days
    Coverage
    4-7m² per litre
    Density
    1,45
    Solids by Volume
    50 %
    Touch Dry
    3 Hours
    Brand
    Rust-Oleum
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Rust-Oleum Biosan Ultra is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT