Sikagard 405 W is a single component white, waterborne acrylic resin based coating containing an organic in-fim-preservative with a mid-sheen finish.
Topcoat or stand alone coating for internal walls and ceilings - concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for pharmaceutical, medical engineering, food & beverage industry and more.
Features and Benefits
Good resistance to repeated cleaning and disinfection regimes, using mild detergents and cleaning solutions
Tough and highly durable
Good covering and hiding power (opacitiy)
Permeable to water vapour
Ultra low emission
Odourless
Seemless, easy to clean finish
Easy to apply
Mid-sheen finish
Product customisation
Don't forget to save your customization to be able to add to cart
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hiya we previously used your Silagard(sherisheen) in our clean room pharmacy unit. IS this still available or is the Sikagard 405W an equivelent? If ordered how long would this take? regards Carrie Monk
Answer:
Sikagard 205 W (Sterisheen) has been discontinued by Sika and Sikagard 405 W is the nearest alternative we have.
Delivery costs and lead times are as follows;
Sika
Delivery Service
Charge
Orders Under £450.00 + VAT
3 - 5 Working Days
£10.00 + VAT
Orders Under £450.00 + VAT
Next Working Day (by 6.00pm)
£135.00 + VAT
Orders Over £450.00 + VAT
3 - 5 Working Days
FREE
Orders Over £450.00 + VAT
Next Working Day (by 6.00pm)
£55.00 + VAT
Patrick Stapleton on 2018-08-20 17:26:42
Question:
Could you forward me a SDS safety data sheet for the Sikagard 405W coating
Answer:
Both PDS and SDS can be downloaded from the product page under the 'Download' section beneath the product description.
Sika Bonding Primer is a rapid curing, water based, two-component primer to consolidate substrates and enhance the adhesion of SikaRoof MTC, Sikalastic, Sikafloor and Sikagard products.
Features and Benefits:
Rapid curing, overcoat possible after 1 hour
Long pot life - up to 12 hours
Low odour, water based product
Consolidates dusty or...
Sikagard 403 W is a single component, waterborne modified acrylic resin based intermediate and surface coating, containing an antimicrobial additive.
Seamless, easy to clean finish
Good resistance to repeated cleaning regimes using mild detergents and cleaning solutions
Tough and highly durable
Good water vapour permeability
More...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage