Rust-Oleum Biosan Aqua Satin
Rust-Oleum Biosan Aqua Satin is ideal for walls and ceilings where hygiene control is essential in low wear areas. Offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment.
- Available in 90+ RAL & BS colours
- Decorative hygienic paint in gloss, satin or mat in almost any colour
- Good flow, filling and hiding power
- For use on masonry, plaster, wood or concrete
- Ideal for schools, dressing rooms, kitchens etc
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
**Available for delivery - see Delivery Options below**
Rust-Oleum Biosan Aqua Satin
Rust-Oleum Biosan Aqua Satin offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment. Rust-Oleum Mathys Biosan Aqua Satin is for the interior coating of walls and ceilings in low wear areas where controlled hygienic condition are of essential importance.
Features & Benefits
• Single pack water based hygiene wall coating
• Low odour, high coverage
• Good flow, filling and hiding power
• Easy to apply
• On primed woodwork, masonry, plaster or concrete
• Available in 65,000+ colours
A healthy concept...
Significant extra hygienic protection is guaranteed with Biosan® Hygiene Coatings for walls, ceilings and floors. Biosan® contains the unique antibacterial agent BACTRON ™, which surrounds and partly penetrates the resin and pigments;
The active ingredient of BACTRON™ has been scientifically proven to kill most types of bacteria, including ‘super bugs’, by a variety of different mechanisms.
Unlike some other biocides and antimicrobial additives BACTRON™ is not classified as harmful to humans. The active ingredient has food contact approval in the USA and EU.
Biosan® with BACTRON™, supported by good housekeeping practices, is the ideal solution for the maintenance of a hygienic environment in areas where cleanliness is of utmost importance, e.g. hospitals, food processing plants, kitchens, dairies, breweries, abattoirs, leisure centres and schools.
Where surfaces are subjected to severe wear or vigorous cleaning, the antibacterial properties of Biosan® are constantly replenished, providing on-going protection against the harmful effects of bacteria throughout the normal service life of the coating.
Biosan® products are formulated using unique modern water based technology. When used in accordance with instructions, Biosan® is entirely safe. All Biosan® products are classified as non-flammable. Most Biosan® products are rated Class 0 surface spread of flame based on BS 476: Part 6 & 7.
Bactericidal action can be quantified and shown graphically. The image on the left of two Petri dishes compares the ‘kill’ rate of Biosan® containing BACTRON™ (blue) with a control (red) when challenged with Staphylococcus aurous. It uses a logarithmic scale to show that Biosan® with BACTRON™ kills 99% of bacteria during the initial 48 hours. After 7 days the bacteria cannot be detected on the BACTRON™ protected sample whereas significant numbers of potentially pathogenic (disease causing) bacteria are still surviving on the unprotected coating.
The unique antimicrobial action of Biosan® has been independently tested and verified by a DEFRA approved laboratory!
- Density: 1,2 - 1,4
- Gloss Level: Gloss, Matt, Satin
- Solids content in volume: 35-50 %
- Solids Content in weight: 50-65 %
Drying Times At 20°C/RH 50%
- Touch dry: 45 minutes
- Dry to handle: 1 hour
- Dry to recoat: 4 hours (Gloss/Matt), 8 hours (Satin)
- Fully cured: 2 days
10 - 12 m²/l (Gloss/Satin), 7 - 10 m²/l (Matt)
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Do not apply in full sun or too hot conditions, to avoid that the product dries too fast and consequently to avoid a decreased flow. The use of Biosan products does not exclude the necessity to clean and disinfect on a normal and regular basis.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- 4 hours (Gloss/Matt), 8 hours (Satin)
- Fully Cured (at 20°C)
- 2 Days
- 7-10m² per litre
- Min. Application Temperature
- 1,2 - 1,4
- Solids by Volume
- 35-50 %
- 110 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 40 Mins
- Recommended Dry Film Thickness
- 30 µm (gloss/Satin), 60 µm (Matt)
- Recommended Wet Film Thickness
- 90 µm (Gloss/Satin), 125 µm (Matt)
- UN Number
- Not regulated
Be the first to ask a question about this product!