Rust-Oleum 8798 Hygienic Primer
  • Rust-Oleum 8798 Hygienic Primer

Rust-Oleum 8798 Hygienic Acrylic Primer

8798.5

Rust-Oleum 8798 Hygienic Acrylic Primer is a water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat protects walls and ceilings against normal humidity and contamination indoors.

  • Fast drying and recoatable with Rust-Oleum 8700 Hygienic Topcoat
  • Offers better protection against contamination than non-hygienic paint
  • Water-based
  • Multiple coatings in one day possible
  • Can be applied on damp surfaces
Colour
Size
£89.95
VAT excluded

£107.94 Tax incl.
Quantity

Description

Rust-Oleum 8798 Hygienic Acrylic Primer

Rust-Oleum 8798 Hygienic Acrylic Primer is a water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat protects walls and ceilings against normal humidity and contamination indoors.  

Features & Benefits

  • Fast drying and recoatable with Rust-Oleum 8700 Hygienic Topcoat
  • Offers better protection against contamination than non-hygienic paint
  • Water-based
  • Multiple coatings in one day possible
  • Can be applied on damp surfaces

Technical Data

  • Density: 1.29
  • Gloss Level: Satin
  • Solids content in volume: 35 %
  • Heat Resistance: 90 °C (dry heat)

Drying Times At 20°C/RH 50%

  • Touch dry: 30 min (20°C), 2 h (10°C), 30 min (30°C)
  • Dry to handle: 2 h (20°C), 4 h (10°C), 1 h (30°C)
  • Dry to recoat: 4 h (20°C), 6 h (10°C), 3 h (30°C)
  • Fully cured: 3 days (20°C), 5 days (10°C), 2 days (30°C)

Theoretical Consumption

9 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure- (steam) cleaning in combination with appropriate detergents. New concrete, plaster or brick surfaces should cure and dry for at least 30 days prior to application of the coating. Repair surface defects. Remove contamination with RUST-OLEUM FK111 or ND14. Wash total surface with plenty of fresh/warm water or high pressure- (steam) cleaning in order to remove all remnants of contamination and cleaners. Remove deteriorated coatings by scraping and wire brushing. Sand intact coatings to roughen the surface slightly. The surface must be clean and may be slightly damp during application.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
8798.5

Data sheet

Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
2 Hours
Dry to Recoat (at 20°C)
4 Hours
Fully Cured (at 20°C)
3 Days
Coverage
9m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Density
1,29
Solids by Volume
35 %
Heat Resistance (up-to)
90 °C (dry heat)
VOC
30 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. Protect from freezing.
Touch Dry
30 mins
Recommended Dry Film Thickness
115 µm
Recommended Wet Film Thickness
40 μm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum 8700 Hygienic Acrylic Topcoat

Rust-Oleum 8700 Hygienic Acrylic Topcoat is a water-based single pack hygienic topcoat designed and developed by Rust-Oleum which protects walls and ceilings against normal humidity and contamination indoors. Offers better protection against contamination than non-hygienic paint Very fast drying and recoating times (3 coats in a day)...

Price £99.86
In stock

Rust-Oleum FK111 Cleaning Solution

Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical substrates like walls. High-viscosity formulation is ideal for use on walls, does not run off the wall Removes grease, oil, proteins , dirt and many other contaminants Usable as additive for...

Price £37.43
In stock

Rust-Oleum Mathys ND14 Cleaner Degreaser

Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. Concentrated formulation can be diluted 1:20 Use as additive for high pressure cleaning Non-flammable, virtually odour-free

Price £62.28
In stock
16 other products in the same category:

Rust-Oleum Dacfill Frigo Gas & Vapour Tight Coating

Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength. Ideal for cold stores...

Price £128.84
In stock

Rust-Oleum Biosan Aqua Satin

Rust-Oleum Biosan Aqua Satin is ideal for walls and ceilings where hygiene control is essential in low wear areas. Offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment. Decorative hygienic paint in gloss, satin or mat in almost any colour Good flow,...

Price £51.53
In stock

303 Epoxy Floor Paint

303 Epoxy Floor Paint is a high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application. Available in standard and winter grade versions.

Price £61.24
In stock

Sikagard 405 W

Sikagard 405 W is a single component white, waterborne acrylic resin based coating containing an organic in-fim-preservative with a mid-sheen finish.  Topcoat or stand alone coating for internal walls and ceilings - concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for pharmaceutical,...

Price £86.75
In stock

Rust-Oleum 8300 Hygienic Topcoat

A single pack hygienic topcoat developed by Rust-Oleum, which protects walls and ceilings against mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture. Offers protection against mild chemical exposure, humidity and moisture Can be applied as low as -10°C Non-yellowing and...

Price £78.07
In stock

Sikagard 406 W

Sikagard 406 W is a single component white, waterborne acrylic resin based surface coating containing an organic in film preservative with a mat finish.  Topcoat or standalone coating for: internal walls and ceilings for concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for...

Price £86.75
In stock

Sika Standard Drainage Membrane

The Sika Standard Drainage Membrane is an 8mm polypropylene studded membrane used for internal fixing to masonry, stone or concrete walls, dry lined walls, and as a floor membrane where limited water passage is anticipated. Provides a fast track waterproofing solution for walls or floors, suitable for use above and below ground, impermeable...

Price £365.21
In stock

Hydron Nu-Flame FR Anti-Bacterial Colourcoat

Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...

Price £93.25
In stock

SikaProof A Membrane Edges

SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures...

Price £811.27
In stock

Remmers Crete TF

Remmers Crete TF is a solvent-free coating based upon polyurethane technology which provides excellent resistance to abrasion, chemical attack and other physical aggression. Used in areas requiring good wear and chemical resistance Economical cost It is suitable for chemical storage areas; Warehousing Toilets Laboratories Food...

Price £27.90
In stock

Sika MonoTop 109 WaterProofing Mortar

Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in...

Price £15.90
In stock

Zanders PF59 Stain Blocking Primer Finish

Zanders PF59 Stain Blocking Primer Finish is a high quality primer finish in a durable matt finish for all interior and exterior wood, plaster and masonry. Based on advanced acrylic technology Zanders PF59 Stain Blocking Primer Finish also inhibits stains bleeding through the substrate. Features and Benefits Matt finish excellent opacity...

Price £93.98
In stock

Sika Plaster Drainage Membrane

The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls.  Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster.  Features and Benefits Easy to cut, fix and seal Unique undercut...

Price £365.21
In stock

Sikagard 203 W (Steridex)

Sikagard 203 W (Steridex) has been discontinued by the manufacturer and has been replaced with Sikagard 403 W. Should you require any further information or advice on this change, please contact our Technical Department on 0113 2455450 or [email protected]

In stock

Sherwin-Williams Macropoxy M630V2

Sherwin-Williams Macropoxy M630V2 (formerly known as Biogard M630V2) is a water-based, two-pack epoxy gloss finish for interior use only, recommended for application to suitably sealed masonry walls, floors and ceilings. It may also be used on new and old concrete as well as previously painted surfaces and suitably primed steel. 

Price £92.54
In stock

Sikafloor 326

Sikafloor 326 is a two part, solvent free, PUR tough-elastic, low-VOC, self smoothing floor resin that produces a crack-bridging wearing course for industrial floors and car parks. Features and Benefits: Flexible and tough-elastic Crack-bridging Good chemical and mechanical resistance Low VOC emitting Solvent-free Possible slip...

Price £270.00
In stock